#!/bin/hush # Announce version sed -n 's/PRETTY_NAME="\([^"]*\)"/\1/p' /etc/os-release export HOME=/home export PATH=/bin:/sbin # Mount filesystems mountpoint -q proc || mount -t proc proc proc mountpoint -q sys || mount -t sysfs sys sys mountpoint -q dev || mount -t devtmpfs dev dev || mdev -s mkdir -p dev/pts mountpoint -q dev/pts || mount -t devpts dev/pts dev/pts # /tmp inherited from initmpfs # If nobody said how many CPUS to use in builds, try to figure it out. if [ -z "$CPUS" ] then export CPUS=$(echo /sys/devices/system/cpu/cpu[0-9]* | wc -w) [ "$CPUS" -lt 1 ] && CPUS=1 fi export PS1="($HOST:$CPUS) \w \$ " # When running under qemu, do some more setup if [ $$ -eq 1 ] then # Note that 10.0.2.2 forwards to 127.0.0.1 on the host. # Setup networking for QEMU (needs /proc) ifconfig eth0 10.0.2.15 route add default gw 10.0.2.2 # If we have no RTC, try rdate instead: [ "$(date +%s)" -lt 1000 ] && rdate 10.0.2.2 # or time-b.nist.gov # mount hda on /usr/overlay, hdb on /home, and hdc on /mnt, if available [ -b /dev/[hsv]da ] && mkdir -p /usr/overlay && mount /dev/[hsv]da /usr/overlay [ -b /dev/[hsv]db ] && mount -o noatime /dev/[hsv]db /home && cd /home [ -b /dev/[hsv]dc ] && mount -o ro /dev/[hsv]dc /mnt [ -z "$CONSOLE" ] && CONSOLE="$(sed -n 's@.* console=\(/dev/\)*\([^ ]*\).*@\2@p' /proc/cmdline)" # Call overlay/init if available [ -e /usr/overlay/init ] && . /usr/overlay/init [ -z "$HANDOFF" ] && echo Type exit when done. && HANDOFF=/bin/hush [ -z "$CONSOLE" ] && CONSOLE=console exec /sbin/oneit -c /dev/"$CONSOLE" "$HANDOFF" # If we're not PID 1, it's probably a chroot. else [ ! -z "$(grep "default for QEMU" /etc/resolv.conf)" ] && echo "nameserver 8.8.8.8" > /etc/resolv.conf # If we have no RTC, try using ntp to set the clock [ "$(date +%s)" -lt 10000000 ] && ntpd -nq -p north-america.pool.ntp.org # Switch to a shell with command history. echo Type exit when done. /bin/hush cd / umount ./dev/pts umount ./dev umount ./sys umount ./proc sync fi