# Makefile.in generated by automake 1.16.5 from Makefile.am. # libsmartcols/docs/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994-2021 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. # # WARNING: this is not gtk-doc.make file from gtk-doc project. This # file has been modified to match with util-linux requirements: # # * install files to $datadir # * don't maintain generated files in git repository # * don't distribute the final html files # * don't require --enable-gtk-doc for "make dist" # * support out-of-tree build ($srcdir != $builddir) # # -- kzak, Nov 2009 # #################################### # Everything below here is generic # #################################### VPATH = /home/uke/oil/_deps/osh-runtime/util-linux-2.40/libsmartcols/docs am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ *) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ sane_makeflags=$$MFLAGS; \ else \ case $$MAKEFLAGS in \ *\\[\ \ ]*) \ bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ *=*|--*) continue;; \ -*I) strip_trailopt 'I'; skip_next=yes;; \ -*I?*) strip_trailopt 'I';; \ -*O) strip_trailopt 'O'; skip_next=yes;; \ -*O?*) strip_trailopt 'O';; \ -*l) strip_trailopt 'l'; skip_next=yes;; \ -*l?*) strip_trailopt 'l';; \ -[dEDm]) skip_next=yes;; \ -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ *$$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes am__make_dryrun = (target_option=n; $(am__make_running_with_option)) am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) pkgdatadir = $(datadir)/util-linux pkgincludedir = $(includedir)/util-linux pkglibdir = $(libdir)/util-linux pkglibexecdir = $(libexecdir)/util-linux am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-pc-linux-gnu host_triplet = x86_64-pc-linux-gnu subdir = libsmartcols/docs ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_vscript.m4 \ $(top_srcdir)/m4/ax_compare_version.m4 \ $(top_srcdir)/m4/compiler.m4 $(top_srcdir)/m4/gettext.m4 \ $(top_srcdir)/m4/gtk-doc.m4 $(top_srcdir)/m4/iconv.m4 \ $(top_srcdir)/m4/intlmacosx.m4 $(top_srcdir)/m4/lib-ld.m4 \ $(top_srcdir)/m4/lib-link.m4 $(top_srcdir)/m4/lib-prefix.m4 \ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/m4/nls.m4 \ $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/m4/po.m4 \ $(top_srcdir)/m4/progtest.m4 $(top_srcdir)/m4/tls.m4 \ $(top_srcdir)/m4/ul.m4 $(top_srcdir)/m4/year2038.m4 \ $(top_srcdir)/configure.ac am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = version.xml CONFIG_CLEAN_VPATH_FILES = AM_V_P = $(am__v_P_$(V)) am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY)) am__v_P_0 = false am__v_P_1 = : AM_V_GEN = $(am__v_GEN_$(V)) am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY)) am__v_GEN_0 = @echo " GEN " $@; am__v_GEN_1 = AM_V_at = $(am__v_at_$(V)) am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY)) am__v_at_0 = @ am__v_at_1 = SOURCES = DIST_SOURCES = am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n|no|NO) false;; \ *) (install-info --version) >/dev/null 2>&1;; \ esac am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/version.xml.in \ $(top_srcdir)/config/gtk-doc.make DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} '/home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/missing' aclocal-1.16 ADJTIME_PATH = /etc/adjtime AMTAR = $${TAR-tar} AM_DEFAULT_VERBOSITY = 0 AR = ar ASAN_LDFLAGS = ASCIIDOCTOR = AUTOCONF = ${SHELL} '/home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/missing' autoconf AUTOHEADER = ${SHELL} '/home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/missing' autoheader AUTOMAKE = ${SHELL} '/home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/missing' automake-1.16 AWK = gawk BISON = BSD_WARN_CFLAGS = -Wno-clobbered CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -g -O2 COVERAGE_LDFLAGS = CPP = gcc -E CPPFLAGS = CRYPTSETUP_CFLAGS = CRYPTSETUP_LIBS = CRYPTSETUP_LIBS_STATIC = CSCOPE = cscope CTAGS = ctags CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DAEMON_CFLAGS = DAEMON_LDFLAGS = DEFS = -DHAVE_CONFIG_H DEPDIR = .deps DLLTOOL = false DSYMUTIL = DUMPBIN = ECHO_C = ECHO_N = -n ECHO_T = ECONF_CFLAGS = ECONF_LIBS = EGREP = /bin/grep -E ETAGS = etags EXEEXT = FGREP = /bin/grep -F FILECMD = : FLEX = FUZZING_ENGINE_LDFLAGS = GETTEXT_MACRO_VERSION = 0.18 GMSGFMT = : GMSGFMT_015 = : GREP = /bin/grep GTKDOC_CHECK = HTML_DIR = ${datadir}/gtk-doc/html INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s INTLLIBS = INTL_MACOSX_LIBS = LD = /usr/bin/ld LDFLAGS = LIBBLKID_DATE = 27-Mar-2024 LIBBLKID_VERSION = 2.40.0 LIBBLKID_VERSION_INFO = 2:0:1 LIBFDISK_MAJOR_VERSION = 2 LIBFDISK_MINOR_VERSION = 40 LIBFDISK_PATCH_VERSION = 0 LIBFDISK_PC_REQUIRES = uuid blkid LIBFDISK_VERSION = 2.40.0 LIBFDISK_VERSION_INFO = 2:0:1 LIBICONV = -liconv LIBINTL = LIBLASTLOG2_VERSION = 2.40.0 LIBLASTLOG2_VERSION_INFO = 2:0:0 LIBMOUNT_MAJOR_VERSION = 2 LIBMOUNT_MINOR_VERSION = 40 LIBMOUNT_PATCH_VERSION = 0 LIBMOUNT_VERSION = 2.40.0 LIBMOUNT_VERSION_INFO = 2:0:1 LIBOBJS = LIBS = LIBSMARTCOLS_VERSION = 2.40.0 LIBSMARTCOLS_VERSION_INFO = 2:0:1 LIBTOOL = $(SHELL) $(top_builddir)/libtool LIBUSER_CFLAGS = LIBUSER_LIBS = LIBUUID_VERSION = 2.40.0 LIBUUID_VERSION_INFO = 4:0:3 LIPO = LN_S = ln -s LTLIBICONV = -liconv LTLIBINTL = LTLIBOBJS = LT_SYS_LIBRARY_PATH = MAGIC_LIBS = MAKEINFO = ${SHELL} '/home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/missing' makeinfo MANIFEST_TOOL = : MATH_LIBS = MKDIR_P = /bin/mkdir -p MQ_LIBS = -lrt MSGFMT = : MSGFMT_015 = : MSGMERGE = : NCURSES5_CONFIG = NCURSES6_CONFIG = NCURSESW5_CONFIG = NCURSESW6_CONFIG = ncursesw6-config NCURSESW_CFLAGS = NCURSESW_LIBS = NCURSES_CFLAGS = -D_DEFAULT_SOURCE -D_XOPEN_SOURCE=600 NCURSES_LIBS = -lncursesw -ltinfo -ldl NM = /usr/bin/nm -B NMEDIT = OBJDUMP = objdump OBJEXT = o OTOOL = OTOOL64 = PACKAGE = util-linux PACKAGE_BUGREPORT = kzak@redhat.com PACKAGE_NAME = util-linux PACKAGE_STRING = util-linux 2.40 PACKAGE_TARNAME = util-linux PACKAGE_URL = https://www.kernel.org/pub/linux/utils/util-linux/ PACKAGE_VERSION = 2.40 PATH_SEPARATOR = : PKG_CONFIG = PKG_CONFIG_LIBDIR = PKG_CONFIG_PATH = PO4A = POSUB = po PYTHON = /usr/bin/python2 PYTHON_CFLAGS = PYTHON_EXEC_PREFIX = ${exec_prefix} PYTHON_LIBS = PYTHON_PLATFORM = linux2 PYTHON_PREFIX = ${prefix} PYTHON_VERSION = 2.7 PYTHON_WARN_CFLAGS = -Wno-cast-function-type RANLIB = ranlib READLINE_LIBS = -lreadline READLINE_LIBS_STATIC = -lreadline -ltinfo REALTIME_LIBS = -lrt RTAS_LIBS = SED = /bin/sed SELINUX_CFLAGS = SELINUX_LIBS = SELINUX_LIBS_STATIC = SET_MAKE = SHELL = /bin/bash SOCKET_LIBS = SOLIB_CFLAGS = SOLIB_LDFLAGS = SQLITE3_CFLAGS = SQLITE3_LIBS = STRIP = strip SUID_CFLAGS = SUID_LDFLAGS = SYSCONFSTATICDIR = SYSTEMD_CFLAGS = SYSTEMD_DAEMON_CFLAGS = SYSTEMD_DAEMON_LIBS = SYSTEMD_JOURNAL_CFLAGS = SYSTEMD_JOURNAL_LIBS = SYSTEMD_LIBS = TINFOW_CFLAGS = TINFOW_LIBS = TINFO_CFLAGS = TINFO_LIBS = -ltinfo TINFO_LIBS_STATIC = -ltinfo UBSAN_LDFLAGS = USE_NLS = yes VERSION = 2.40 VSCRIPT_LDFLAGS = -Wl,--version-script WARN_CFLAGS = -fno-common -Wall -Wextra -Wdiscarded-qualifiers -Wimplicit-function-declaration -Wmissing-declarations -Wmissing-parameter-type -Wmissing-prototypes -Wnested-externs -Wno-missing-field-initializers -Wold-style-definition -Wpointer-arith -Wredundant-decls -Wsign-compare -Wstrict-prototypes -Wtype-limits -Wuninitialized -Wunused-but-set-parameter -Wunused-but-set-variable -Wunused-parameter -Wunused-result -Wunused-variable -Wvla -Walloca -Werror=sequence-point XGETTEXT = : XGETTEXT_015 = : XGETTEXT_EXTRA_OPTIONS = XSLTPROC = YACC = yacc YFLAGS = abs_builddir = /home/uke/oil/_tmp/osh-runtime/raw.no-host.2024-07-20__17-15-29/files-11/libsmartcols/docs abs_srcdir = /home/uke/oil/_deps/osh-runtime/util-linux-2.40/libsmartcols/docs abs_top_builddir = /home/uke/oil/_tmp/osh-runtime/raw.no-host.2024-07-20__17-15-29/files-11 abs_top_srcdir = /home/uke/oil/_deps/osh-runtime/util-linux-2.40 ac_ct_AR = ar ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_DUMPBIN = am__include = include am__leading_dot = . am__quote = am__tar = tar --format=posix -chf - "$$tardir" am__untar = tar -xf - bashcompletiondir = ${datarootdir}/bash-completion/completions bindir = /bin build = x86_64-pc-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = pc builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = ${datarootdir}/doc/${PACKAGE_TARNAME} dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-pc-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = pc htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = ${SHELL} /home/uke/oil/_deps/osh-runtime/util-linux-2.40/config/install-sh libdir = /lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = /var mandir = ${datarootdir}/man mkdir_p = $(MKDIR_P) oldincludedir = /usr/include pdfdir = ${docdir} pkgconfigdir = ${usrlib_execdir}/pkgconfig pkgpyexecdir = ${pyexecdir}/util-linux pkgpythondir = ${pythondir}/util-linux prefix = /usr program_transform_name = s,x,x, psdir = ${docdir} pyexecdir = ${PYTHON_EXEC_PREFIX}/lib/python2.7/dist-packages pythondir = ${PYTHON_PREFIX}/lib/python2.7/dist-packages runstatedir = /run sbindir = /sbin sharedstatedir = ${prefix}/com srcdir = /home/uke/oil/_deps/osh-runtime/util-linux-2.40/libsmartcols/docs sysconfdir = /etc sysconfstaticdir = ${prefix}/lib systemdsystemunitdir = target_alias = tmpfilesdir = top_build_prefix = ../../ top_builddir = ../.. top_srcdir = /home/uke/oil/_deps/osh-runtime/util-linux-2.40 usrbin_execdir = ${exec_prefix}/bin usrlib_execdir = ${exec_prefix}/lib usrsbin_execdir = ${exec_prefix}/sbin vendordir = with_bashcompletiondir = ${datarootdir}/bash-completion/completions with_systemdsystemunitdir = with_tmpfilesdir = # We require automake 1.10 at least. AUTOMAKE_OPTIONS = 1.10 # This is a blank Makefile.am for using gtk-doc. # Copy this to your project's API docs directory and modify the variables to # suit your project. See the GTK+ Makefiles in gtk+/docs/reference for examples # of using the various options. # The name of the module, e.g. 'glib'. DOC_MODULE = libsmartcols # Uncomment for versioned docs and specify the version of the module, e.g. '2'. #DOC_MODULE_VERSION=2 # The top-level SGML file. You can change this if you want to. DOC_MAIN_SGML_FILE = $(DOC_MODULE)-docs.xml # The directory containing the source code. Relative to $(srcdir). # gtk-doc will search all .c & .h files beneath here for inline comments # documenting the functions and macros. # e.g. DOC_SOURCE_DIR=../../../gtk DOC_SOURCE_DIR = ../src # Extra options to pass to gtkdoc-scangobj. Not normally needed. SCANGOBJ_OPTIONS = # Extra options to supply to gtkdoc-scan. # e.g. SCAN_OPTIONS=--deprecated-guards="GTK_DISABLE_DEPRECATED" SCAN_OPTIONS = # Extra options to supply to gtkdoc-mkdb. # e.g. MKDB_OPTIONS=--sgml-mode --output-format=xml MKDB_OPTIONS = --sgml-mode --output-format=xml --name-space scols # Extra options to supply to gtkdoc-mktmpl # e.g. MKTMPL_OPTIONS=--only-section-tmpl MKTMPL_OPTIONS = # Extra options to supply to gtkdoc-mkhtml MKHTML_OPTIONS = # Extra options to supply to gtkdoc-fixref. Not normally needed. # e.g. FIXXREF_OPTIONS=--extra-dir=../gdk-pixbuf/html --extra-dir=../gdk/html FIXXREF_OPTIONS = # Used for dependencies. The docs will be rebuilt if any of these change. # e.g. HFILE_GLOB=$(top_srcdir)/gtk/*.h # e.g. CFILE_GLOB=$(top_srcdir)/gtk/*.c HFILE_GLOB = $(top_builddir)/libsmartcols/src/libsmartcols.h CFILE_GLOB = $(top_srcdir)/libsmartcols/src/*.c # Extra header to include when scanning, which are not under DOC_SOURCE_DIR # e.g. EXTRA_HFILES=$(top_srcdir}/contrib/extra.h EXTRA_HFILES = # Header files to ignore when scanning. Use base file name, no paths # e.g. IGNORE_HFILES=gtkdebug.h gtkintl.h IGNORE_HFILES = smartcolsP.h # Images to copy into HTML directory. # e.g. HTML_IMAGES=$(top_srcdir)/gtk/stock-icons/stock_about_24.png HTML_IMAGES = # Extra SGML files that are included by $(DOC_MAIN_SGML_FILE). # e.g. content_files=running.sgml building.sgml changes-2.0.sgml content_files = $(builddir)/version.xml # SGML files where gtk-doc abbreviations (#GtkWidget) are expanded # These files must be listed here *and* in content_files # e.g. expand_content_files=running.sgml expand_content_files = # CFLAGS and LDFLAGS for compiling gtkdoc-scangobj with your library. # Only needed if you are using gtkdoc-scangobj to dynamically query widget # signals and properties. # e.g. GTKDOC_CFLAGS=-I$(top_srcdir) -I$(top_builddir) $(GTK_DEBUG_FLAGS) # e.g. GTKDOC_LIBS=$(top_builddir)/gtk/$(gtktargetlib) GTKDOC_CFLAGS = GTKDOC_LIBS = #GTKDOC_CC = $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) GTKDOC_CC = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) #GTKDOC_LD = $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) GTKDOC_LD = $(LIBTOOL) --tag=CC --mode=link $(CC) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) #GTKDOC_RUN = GTKDOC_RUN = $(LIBTOOL) --mode=execute # We set GPATH here; this gives us semantics for GNU make # which are more like other make's VPATH, when it comes to # whether a source that is a target of one rule is then # searched for in VPATH/GPATH. # GPATH = $(srcdir) TARGET_DIR = $(docdir)/$(DOC_MODULE) # Files not to distribute # for --rebuild-types in $(SCAN_OPTIONS), e.g. $(DOC_MODULE).types # for --rebuild-sections in $(SCAN_OPTIONS) e.g. $(DOC_MODULE)-sections.txt DISTCLEANFILES = version.xml # This includes the standard gtk-doc make rules, copied by gtkdocize. # Other files to distribute # e.g. EXTRA_DIST += version.xml.in EXTRA_DIST = $(content_files) $(HTML_IMAGES) $(DOC_MAIN_SGML_FILE) \ $(DOC_MODULE)-sections.txt version.xml.in # $(DOC_MODULE)-overrides.txt DOC_STAMPS = scan-build.stamp sgml-build.stamp html-build.stamp \ $(srcdir)/setup.stamp $(srcdir)/sgml.stamp \ $(srcdir)/html.stamp SCANOBJ_FILES = \ $(DOC_MODULE).args \ $(DOC_MODULE).hierarchy \ $(DOC_MODULE).interfaces \ $(DOC_MODULE).prerequisites \ $(DOC_MODULE).signals \ $(DOC_MODULE).types # util-linux: we don't use types REPORT_FILES = \ $(DOC_MODULE)-undocumented.txt \ $(DOC_MODULE)-undeclared.txt \ $(DOC_MODULE)-unused.txt CLEANFILES = $(SCANOBJ_FILES) $(REPORT_FILES) $(DOC_STAMPS) all: all-am .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/gtk-doc.make $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign libsmartcols/docs/Makefile'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) --foreign libsmartcols/docs/Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ esac; $(top_srcdir)/config/gtk-doc.make $(am__empty): $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(am__aclocal_m4_deps): version.xml: $(top_builddir)/config.status $(srcdir)/version.xml.in cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs tags TAGS: ctags CTAGS: cscope cscopelist: distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ else \ test -f "$(distdir)/$$file" \ || cp -p $$d/$$file "$(distdir)/$$file" \ || exit 1; \ fi; \ done check-am: all-am check: check-am all-am: Makefile all-local installdirs: install: install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-am install-strip: if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-am clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-am -rm -f Makefile distclean-am: clean-am distclean-generic distclean-local dvi: dvi-am dvi-am: html: html-am html-am: info: info-am info-am: install-data-am: install-data-local install-dvi: install-dvi-am install-dvi-am: install-exec-am: install-html: install-html-am install-html-am: install-info: install-info-am install-info-am: install-man: install-pdf: install-pdf-am install-pdf-am: install-ps: install-ps-am install-ps-am: installcheck-am: maintainer-clean: maintainer-clean-am -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-am mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-am pdf-am: ps: ps-am ps-am: uninstall-am: uninstall-local .MAKE: install-am install-strip .PHONY: all all-am all-local check check-am clean clean-generic \ clean-libtool clean-local cscopelist-am ctags-am distclean \ distclean-generic distclean-libtool distclean-local distdir \ dvi dvi-am html html-am info info-am install install-am \ install-data install-data-am install-data-local install-dvi \ install-dvi-am install-exec install-exec-am install-html \ install-html-am install-info install-info-am install-man \ install-pdf install-pdf-am install-ps install-ps-am \ install-strip installcheck installcheck-am installdirs \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags-am uninstall uninstall-am uninstall-local .PRECIOUS: Makefile #all-local: html-build.stamp all-local: docs: html-build.stamp $(REPORT_FILES): sgml-build.stamp #### setup #### setup-build.stamp: -@if test "$(abs_srcdir)" != "$(abs_builddir)" ; then \ echo 'gtk-doc: Preparing build'; \ files=`echo $(EXTRA_DIST) $(expand_content_files) $(srcdir)/$(DOC_MODULE).types`; \ if test "x$$files" != "x" ; then \ for file in $$files ; do \ test -f $(abs_srcdir)/$$file && \ cp -p $(abs_srcdir)/$$file $(abs_builddir)/; \ done \ fi \ fi @touch setup-build.stamp setup.stamp: setup-build.stamp @true #### scan #### scan-build.stamp: $(HFILE_GLOB) $(CFILE_GLOB) $(srcdir)/$(DOC_MODULE)-*.txt $(content_files) @test -f $(DOC_MODULE)-sections.txt || \ cp $(srcdir)/$(DOC_MODULE)-sections.txt $(builddir) $(AM_V_GEN)gtkdoc-scan --module=$(DOC_MODULE) \ --source-dir=$(srcdir)/$(DOC_SOURCE_DIR) \ --source-dir=$(builddir)/$(DOC_SOURCE_DIR) \ --ignore-decorators="__ul_attribute__\(.*\)" \ --ignore-headers="$(IGNORE_HFILES)" \ --output-dir=$(builddir) \ $(SCAN_OPTIONS) $(EXTRA_HFILES) @ if grep -l '^..*$$' $(srcdir)/$(DOC_MODULE).types > /dev/null 2>&1 ; then \ CC="$(GTKDOC_CC)" LD="$(GTKDOC_LD)" RUN="$(GTKDOC_RUN)" \ CFLAGS="$(GTKDOC_CFLAGS) $(CFLAGS)" LDFLAGS="$(GTKDOC_LIBS) \ $(LDFLAGS)" gtkdoc-scangobj $(SCANGOBJ_OPTIONS) \ --module=$(DOC_MODULE) --output-dir=$(builddir) ; \ else \ for i in $(SCANOBJ_FILES) ; do \ test -f $$i || touch $$i ; \ done \ fi @ touch scan-build.stamp $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt: scan-build.stamp @true #### templates #### # #tmpl-build.stamp: $(DOC_MODULE)-decl.txt $(SCANOBJ_FILES) $(srcdir)/$(DOC_MODULE)-sections.txt $(DOC_MODULE)-overrides.txt # @echo 'gtk-doc: Rebuilding template files' # test -z $(builddir)/tmpl || $(MKDIR_P) $(builddir)/tmpl # gtkdoc-mktmpl --module=$(DOC_MODULE) \ # $(MKTMPL_OPTIONS) # touch tmpl-build.stamp # #tmpl.stamp: tmpl-build.stamp # @true # #tmpl/*.sgml: # @true # #### xml #### sgml-build.stamp: setup.stamp $(HFILE_GLOB) $(CFILE_GLOB) $(DOC_MODULE)-decl.txt $(DOC_MODULE)-sections.txt $(expand_content_files) $(AM_V_GEN)gtkdoc-mkdb --module=$(DOC_MODULE) \ --source-dir=$(srcdir)/$(DOC_SOURCE_DIR) \ --source-dir=$(builddir)/$(DOC_SOURCE_DIR) \ --output-format=xml \ --ignore-files="$(IGNORE_HFILES)" \ --expand-content-files="$(expand_content_files)" \ --main-sgml-file=$(srcdir)/$(DOC_MAIN_SGML_FILE) \ $(MKDB_OPTIONS) @touch sgml-build.stamp sgml.stamp: sgml-build.stamp @true #### html #### html-build.stamp: sgml.stamp $(srcdir)/$(DOC_MAIN_SGML_FILE) $(content_files) @rm -rf $(builddir)/html @$(MKDIR_P) $(builddir)/html $(AM_V_GEN)cd $(builddir)/html && \ gtkdoc-mkhtml --path="$(abs_builddir):$(abs_builddir)/xml:$(abs_srcdir)" \ $(MKHTML_OPTIONS) \ $(DOC_MODULE) \ $(abs_srcdir)/$(DOC_MAIN_SGML_FILE) @test "x$(HTML_IMAGES)" = "x" || \ ( cd $(srcdir) && cp $(HTML_IMAGES) $(abs_builddir)/html ) $(AM_V_GEN)gtkdoc-fixxref --module-dir=html \ --module=$(DOC_MODULE) \ --html-dir=$(HTML_DIR) \ $(FIXXREF_OPTIONS) @touch html-build.stamp ############## clean-local: rm -f *~ *.bak rm -rf .libs distclean-local: rm -rf xml html $(REPORT_FILES) *.stamp \ $(DOC_MODULE)-overrides.txt \ $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt test $(abs_builddir) == $(abs_srcdir) || \ rm -f $(DOC_MODULE)-*.txt $(DOC_MODULE)-*.xml *.xml.in install-data-local: installfiles=`echo $(builddir)/html/*`; \ if test "$$installfiles" = '$(builddir)/html/*'; \ then echo '-- Nothing to install' ; \ else \ if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ $(mkinstalldirs) $${installdir} ; \ for i in $$installfiles; do \ echo '-- Installing '$$i ; \ $(INSTALL_DATA) $$i $${installdir}; \ done; \ if test -n "$(DOC_MODULE_VERSION)"; then \ mv -f $${installdir}/$(DOC_MODULE).devhelp2 \ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp2; \ mv -f $${installdir}/$(DOC_MODULE).devhelp \ $${installdir}/$(DOC_MODULE)-$(DOC_MODULE_VERSION).devhelp; \ fi; \ ! which gtkdoc-rebase >/dev/null 2>&1 || \ gtkdoc-rebase --relative --dest-dir=$(DESTDIR) --html-dir=$${installdir} ; \ fi uninstall-local: if test -n "$(DOC_MODULE_VERSION)"; then \ installdir="$(DESTDIR)$(TARGET_DIR)-$(DOC_MODULE_VERSION)"; \ else \ installdir="$(DESTDIR)$(TARGET_DIR)"; \ fi; \ rm -rf $${installdir} # # Require gtk-doc when making dist # #dist-check-gtkdoc: dist-check-gtkdoc: @echo "*** gtk-doc must be installed and enabled in order to make dist" @false #dist-hook: dist-check-gtkdoc dist-hook-local sgml.stamp html-build.stamp # mkdir $(distdir)/tmpl # mkdir $(distdir)/xml # mkdir $(distdir)/html # -cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl # -cp $(srcdir)/xml/*.xml $(distdir)/xml # cp $(srcdir)/html/* $(distdir)/html # -cp $(srcdir)/$(DOC_MODULE).types $(distdir)/ # -cp $(srcdir)/$(DOC_MODULE)-sections.txt $(distdir)/ # cd $(distdir) && rm -f $(DISTCLEANFILES) # ! which gtkdoc-rebase >/dev/null 2>&1 || \ # gtkdoc-rebase --online --relative --html-dir=$(distdir)/html # #.PHONY : dist-hook-local docs # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: