# Maintainer: Natanael Copa <ncopa@alpinelinux.org>
setvar pkgname = 'bluez'
setvar pkgver = '5.47'
setvar pkgrel = '2'
setvar pkgdesc = ""Tools for the Bluetooth protocol stack""
setvar url = ""http://www.bluez.org/""
setvar arch = ""all""
setvar license = ""GPL2+""
setvar depends = ""consolekit2 dbus""
setvar replaces = ""udev""
setvar makedepends = ""dbus-dev libusb-compat-dev eudev-dev json-c-dev
	libical-dev readline-dev glib-dev linux-headers
	autoconf automake libtool""
setvar subpackages = ""$pkgname-dev $pkgname-doc $pkgname-libs $pkgname-bccmd $pkgname-btmon $pkgname-cups
	$pkgname-deprecated $pkgname-hid2hci $pkgname-meshctl $pkgname-obexd""
setvar source = ""http://www.kernel.org/pub/linux/bluetooth/bluez-$pkgver.tar.xz
	bluetooth.initd
	rfcomm.initd
	rfcomm.confd
        001-bcm43xx-Add-bcm43xx-3wire-variant.patch
        002-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch
        003-Increase-firmware-load-timeout-to-30s.patch
        004-Move-the-43xx-firmware-into-lib-firmware.patch
	bluez-5.40-obexd_without_systemd-1.patch
	""
setvar builddir = ""$srcdir/$pkgname-$pkgver""

proc build {
	cd $builddir
	./configure \
		--build=$CBUILD \
		--host=$CHOST \
		--prefix=/usr \
		--sysconfdir=/etc \
		--mandir=/usr/share/man \
		--localstatedir=/var \
		--libexecdir=/usr/lib \
		--disable-systemd \
		--enable-library \
		--enable-deprecated \
		--enable-mesh \
		|| return 1
	make || return 1
}

proc package {
	cd $builddir
	make install DESTDIR="$pkgdir" || return 1
	install -D -m644 src/main.conf "$pkgdir"/etc/bluetooth/main.conf \
		|| return 1

	install -Dm755 "$srcdir"/bluetooth.initd "$pkgdir"/etc/init.d/bluetooth
	install -Dm755 "$srcdir"/rfcomm.initd "$pkgdir"/etc/init.d/rfcomm
	install -Dm644 "$srcdir"/rfcomm.confd "$pkgdir"/etc/conf.d/rfcomm
	install -Dm755 test/simple-agent "$pkgdir"/usr/bin/bluez-simple-agent
}

proc bccmd {
	setvar pkgdesc = ""Bluez utility for the CSR BCCMD interface""
	mkdir -p "$subpkgdir"/usr/bin
	mv "$pkgdir"/usr/bin/bccmd "$subpkgdir"/usr/bin/
}

proc btmon {
	setvar pkgdesc = ""Bluez bluetooth monitor""
	mkdir -p "$subpkgdir"/usr/bin
	mv "$pkgdir"/usr/bin/btmon "$subpkgdir"/usr/bin/
}

proc cups {
	setvar pkgdesc = ""Bluez backend for CUPS""
	mkdir -p "$subpkgdir"/usr/lib/
	mv "$pkgdir"/usr/lib/cups "$subpkgdir"/usr/lib/
}

proc hid2hci {
	setvar pkgdesc = ""Put HID proxying bluetooth HCI's into HCI mode""
	setvar replaces = ""bluez""
	mkdir -p $subpkgdir
	mv "$pkgdir"/lib "$subpkgdir"/
}

proc deprecated {
	setvar pkgdesc = ""Deprecated bluetooth tools""
	mkdir -p "$subpkgdir"/usr/bin
	mv "$pkgdir"/usr/bin/ciptool \
		"$pkgdir"/usr/bin/hciattach \
		"$pkgdir"/usr/bin/hciconfig \
		"$pkgdir"/usr/bin/hcidump \
		"$pkgdir"/usr/bin/hcitool \
		"$pkgdir"/usr/bin/rfcomm \
		"$pkgdir"/usr/bin/sdptool \
		"$subpkgdir"/usr/bin/
}

proc meshctl {
	setvar pkgdesc = ""Bluez tool for interacting with bluetooth mesh networks""
	mkdir -p "$subpkgdir"/usr/bin
	mv "$pkgdir"/usr/bin/meshctl "$subpkgdir"/usr/bin/
}

proc obexd {
	setvar pkgdesc = ""Bluez OBEX daemon""
	mkdir -p "$subpkgdir"/usr/lib/bluetooth
	mv "$pkgdir"/usr/lib/bluetooth/obexd "$subpkgdir"/usr/lib/bluetooth
}

setvar sha512sums = ""86fa1baae1593d4824038db8418358b0be624c81fc23ee8f96ec08979d309a2377be3924ab53cc0fcb712aec8e696360e9a9f4de4c12cc31b14de5cf495a11a6  bluez-5.47.tar.xz
fc43c78ed248ea412529eed5ae8bb47bacca9bf5b3b10de121ddd4e792c85893561a88be4aa2c6318106e5d2146a721445152d44fa60ca257ca0b4eb87318c1e  bluetooth.initd
8d7b7c8938a2316ce0a855e9bdf1ef8fcdf33d23f4011df828270a088b88b140a19c432e83fef15355d0829e3c86be05b63e7718fef88563254ea239b8dc12ac  rfcomm.initd
a70aa0dbbabe7e29ee81540a6f98bf191a850da55a28f678975635caf34b363cf4d461a801b3484120ee28fdd21240bd456a4f5d706262700924bd2e9a0972fb  rfcomm.confd
73202915fda01d420b2864da77b1c25af5a55c815e9be6546400a0940bfb6097d83322790bc22a80ec0fcd557144fdd1877e243a79285a7f040ff96ba3600b94  001-bcm43xx-Add-bcm43xx-3wire-variant.patch
d5fd1c962bd846eaa6fff879bab85f753eb367d514f82d133b5d3242e1da989af5eddd942c60a87d5b67783e060f91bfa0f74fb1e8e6699cdee6e5bbe6a431ea  002-bcm43xx-The-UART-speed-must-be-reset-after-the-firmw.patch
784e9644c8de4e2693e2eeed988a245608b8cb14e1fc0dff8795c60c527b2e8d0c87862cfbfd6b850b47ae80cdf993a5ed3f477078ea1068fd7374899c7a1a77  003-Increase-firmware-load-timeout-to-30s.patch
42ac04044a8c66e07487598b3a75ef52efc32999ebce4e7c63f6198e2f603f4a1442e74600e43a0938cb4f52d4db0298aa99050b18144b84990cda71748e9de5  004-Move-the-43xx-firmware-into-lib-firmware.patch
41ce7ccf78cca97563f0ef31e01dac6eb4484c24fe57be360b5e8de8c5bff5845e9d395766f891bd3f123788344456c88c9fc00cd1bb7c6a1dca89d09f19172b  bluez-5.40-obexd_without_systemd-1.patch""