Loading _build/deps-source/busybox/ OK name: busybox -- single version: 1.35.0 wedge-make () { local src_dir=$1; local build_dir=$2; local install_dir=$3; make KBUILD_SRC=$src_dir -f $src_dir/Makefile defconfig; time make } OK wedge-make wedge-install () { local build_dir=$1; local install_dir=$2; cp -v $build_dir/busybox $install_dir; ln -s -f -v busybox $install_dir/ash } OK wedge-install OK wedge-smoke-test Loaded _build/deps-source/busybox/ SRC /home/build/oil/_build/deps-source/busybox/busybox-1.35.0 ~/oil/_build/wedge/tmp/busybox-1.35.0 ~/oil HOSTCC scripts/basic/fixdep HOSTCC scripts/basic/split-include HOSTCC scripts/basic/docproc GEN /home/build/oil/_build/wedge/tmp/busybox-1.35.0/Makefile GEN include/applets.h GEN include/usage.h GEN sysklogd/Kbuild GEN sysklogd/Config.in GEN modutils/Kbuild GEN modutils/Config.in GEN editors/Kbuild GEN editors/Config.in GEN procps/Kbuild GEN procps/Config.in GEN runit/Kbuild GEN runit/Config.in GEN coreutils/Kbuild GEN coreutils/Config.in GEN coreutils/libcoreutils/Kbuild GEN console-tools/Kbuild GEN console-tools/Config.in GEN mailutils/Kbuild GEN mailutils/Config.in GEN findutils/Kbuild GEN findutils/Config.in GEN applets/Kbuild GEN libpwdgrp/Kbuild GEN init/Kbuild GEN init/Config.in GEN klibc-utils/Kbuild GEN klibc-utils/Config.in GEN libbb/Kbuild GEN libbb/Config.in GEN selinux/Kbuild GEN selinux/Config.in GEN scripts/Kbuild GEN archival/Kbuild GEN archival/Config.in GEN archival/libarchive/Kbuild GEN networking/Kbuild GEN networking/Config.in GEN networking/udhcp/Kbuild GEN networking/udhcp/Config.in GEN networking/libiproute/Kbuild GEN shell/Kbuild GEN shell/Config.in GEN util-linux/Kbuild GEN util-linux/Config.in GEN util-linux/volume_id/Kbuild GEN util-linux/volume_id/Config.in GEN debianutils/Kbuild GEN debianutils/Config.in GEN loginutils/Kbuild GEN loginutils/Config.in GEN e2fsprogs/Kbuild GEN e2fsprogs/Config.in GEN miscutils/Kbuild GEN miscutils/Config.in GEN printutils/Kbuild GEN printutils/Config.in HOSTCC scripts/kconfig/conf.o HOSTCC scripts/kconfig/kxgettext.o HOSTCC scripts/kconfig/mconf.o SHIPPED scripts/kconfig/zconf.tab.c SHIPPED scripts/kconfig/lex.zconf.c SHIPPED scripts/kconfig/zconf.hash.c HOSTCC scripts/kconfig/zconf.tab.o HOSTLD scripts/kconfig/conf scripts/kconfig/conf -d Config.in * * Busybox Configuration * * * Settings * Enable compatibility for full-blown desktop systems (8kb) (DESKTOP) [Y/n/?] (NEW) y Provide compatible behavior for rare corner cases (bigger code) (EXTRA_COMPAT) [N/y/?] (NEW) n Building for Fedora distribution (FEDORA_COMPAT) [N/y/?] (NEW) n Enable obsolete features removed before SUSv3 (INCLUDE_SUSv2) [Y/n/?] (NEW) y Support --long-options (LONG_OPTS) [Y/?] (NEW) y Show applet usage messages (SHOW_USAGE) [Y/n/?] (NEW) y Show verbose applet usage messages (FEATURE_VERBOSE_USAGE) [Y/n/?] (NEW) y Store applet usage messages in compressed form (FEATURE_COMPRESS_USAGE) [Y/n/?] (NEW) y Support files > 2 GB (LFS) [Y/n/?] (NEW) y Support PAM (Pluggable Authentication Modules) (PAM) [N/y/?] (NEW) n Use the devpts filesystem for Unix98 PTYs (FEATURE_DEVPTS) [Y/n/?] (NEW) y Support utmp file (FEATURE_UTMP) [Y/n/?] (NEW) y Support wtmp file (FEATURE_WTMP) [Y/n/?] (NEW) y Support writing pidfiles (FEATURE_PIDFILE) [Y/n/?] (NEW) y Directory for pidfiles (PID_FILE_PATH) [/var/run] (NEW) /var/run Include busybox applet (BUSYBOX) [Y/n/?] (NEW) y Support --show SCRIPT (FEATURE_SHOW_SCRIPT) [Y/n] (NEW) y Support --install [-s] to install applet links at runtime (FEATURE_INSTALLER) [Y/n/?] (NEW) y Don't use /usr (INSTALL_NO_USR) [N/y/?] (NEW) n Drop SUID state for most applets (FEATURE_SUID) [Y/n/?] (NEW) y Enable SUID configuration via /etc/busybox.conf (FEATURE_SUID_CONFIG) [Y/n/?] (NEW) y Suppress warning message if /etc/busybox.conf is not readable (FEATURE_SUID_CONFIG_QUIET) [Y/n/?] (NEW) y exec prefers applets (FEATURE_PREFER_APPLETS) [N/y/?] (NEW) n Path to busybox executable (BUSYBOX_EXEC_PATH) [/proc/self/exe] (NEW) /proc/self/exe Support NSA Security Enhanced Linux (SELINUX) [N/y/?] (NEW) n Clean up all memory before exiting (usually not needed) (FEATURE_CLEAN_UP) [N/y/?] (NEW) n Support LOG_INFO level syslog messages (FEATURE_SYSLOG_INFO) [Y/n/?] (NEW) y * * Build Options * Build static binary (no shared libs) (STATIC) [N/y/?] (NEW) n Build position independent executable (PIE) [N/y/?] (NEW) n Force NOMMU build (NOMMU) [N/y/?] (NEW) n Build shared libbusybox (BUILD_LIBBUSYBOX) [N/y/?] (NEW) n Cross compiler prefix (CROSS_COMPILER_PREFIX) [] (NEW) Path to sysroot (SYSROOT) [] (NEW) Additional CFLAGS (EXTRA_CFLAGS) [] (NEW) Additional LDFLAGS (EXTRA_LDFLAGS) [] (NEW) Additional LDLIBS (EXTRA_LDLIBS) [] (NEW) Avoid using GCC-specific code constructs (USE_PORTABLE_CODE) [N/y/?] (NEW) n Use -mpreferred-stack-boundary=2 on i386 arch (STACK_OPTIMIZATION_386) [Y/n/?] (NEW) y Use -static-libgcc (STATIC_LIBGCC) [Y/n/?] (NEW) y * * Installation Options ("make install" behavior) * What kind of applet links to install > 1. as soft-links (INSTALL_APPLET_SYMLINKS) (NEW) 2. as hard-links (INSTALL_APPLET_HARDLINKS) (NEW) 3. as script wrappers (INSTALL_APPLET_SCRIPT_WRAPPERS) (NEW) 4. not installed (INSTALL_APPLET_DONT) (NEW) choice[1-4?]: 1 Destination path for 'make install' (PREFIX) [./_install] (NEW) ./_install * * Debugging Options * Build with debug information (DEBUG) [N/y/?] (NEW) n Enable runtime sanitizers (ASAN/LSAN/USAN/etc...) (DEBUG_SANITIZE) [N/y/?] (NEW) n Build unit tests (UNIT_TEST) [N/y/?] (NEW) n Abort compilation on any warning (WERROR) [N/y/?] (NEW) n Warn about single parameter bb_xx_msg calls (WARN_SIMPLE_MSG) [N/y/?] (NEW) n Additional debugging library > 1. None (NO_DEBUG_LIB) (NEW) 2. Dmalloc (DMALLOC) (NEW) 3. Electric-fence (EFENCE) (NEW) choice[1-3?]: 1 * * Library Tuning * Use the end of BSS page (FEATURE_USE_BSS_TAIL) [N/y/?] (NEW) n Enable fractional duration arguments (FLOAT_DURATION) [Y/n/?] (NEW) y Support RTMIN[+n] and RTMAX[-n] signal names (FEATURE_RTMINMAX) [Y/n/?] (NEW) y Use the definitions of SIGRTMIN/SIGRTMAX provided by libc (FEATURE_RTMINMAX_USE_LIBC_DEFINITIONS) [Y/n/?] (NEW) y Buffer allocation policy > 1. Allocate with Malloc (FEATURE_BUFFERS_USE_MALLOC) (NEW) 2. Allocate on the Stack (FEATURE_BUFFERS_GO_ON_STACK) (NEW) 3. Allocate in the .bss section (FEATURE_BUFFERS_GO_IN_BSS) (NEW) choice[1-3?]: 1 Minimum password length (PASSWORD_MINLEN) [6] (NEW) 6 MD5: Trade bytes for speed (0:fast, 3:slow) (MD5_SMALL) [1] (NEW) 1 SHA3: Trade bytes for speed (0:fast, 1:slow) (SHA3_SMALL) [1] (NEW) 1 Non-POSIX, but safer, copying to special nodes (FEATURE_NON_POSIX_CP) [Y/n/?] (NEW) y Give more precise messages when copy fails (cp, mv etc) (FEATURE_VERBOSE_CP_MESSAGE) [N/y/?] (NEW) n Use sendfile system call (FEATURE_USE_SENDFILE) [Y/n/?] (NEW) y Copy buffer size, in kilobytes (FEATURE_COPYBUF_KB) [4] (NEW) 4 Use clock_gettime(CLOCK_MONOTONIC) syscall (MONOTONIC_SYSCALL) [Y/n/?] (NEW) y Use ioctl names rather than hex values in error messages (IOCTL_HEX2STR_ERROR) [Y/n/?] (NEW) y Command line editing (FEATURE_EDITING) [Y/n/?] (NEW) y Maximum length of input (FEATURE_EDITING_MAX_LEN) [1024] (NEW) 1024 vi-style line editing commands (FEATURE_EDITING_VI) [N/y/?] (NEW) n History size (FEATURE_EDITING_HISTORY) [255] (NEW) 255 History saving (FEATURE_EDITING_SAVEHISTORY) [Y/n/?] (NEW) y Save history on shell exit, not after every command (FEATURE_EDITING_SAVE_ON_EXIT) [N/y/?] (NEW) n Reverse history search (FEATURE_REVERSE_SEARCH) [Y/n/?] (NEW) y Tab completion (FEATURE_TAB_COMPLETION) [Y/n] (NEW) y Username completion (FEATURE_USERNAME_COMPLETION) [Y/n] (NEW) y Fancy shell prompts (FEATURE_EDITING_FANCY_PROMPT) [Y/n/?] (NEW) y Enable automatic tracking of window size changes (FEATURE_EDITING_WINCH) [Y/n] (NEW) y Query cursor position from terminal (FEATURE_EDITING_ASK_TERMINAL) [N/y/?] (NEW) n Enable locale support (system needs locale for this to work) (LOCALE_SUPPORT) [N/y/?] (NEW) n Support Unicode (UNICODE_SUPPORT) [Y/n/?] (NEW) y Check $LC_ALL, $LC_CTYPE and $LANG environment variables (FEATURE_CHECK_UNICODE_IN_ENV) [N/y/?] (NEW) n Character code to substitute unprintable characters with (SUBST_WCHAR) [63] (NEW) 63 Range of supported Unicode characters (LAST_SUPPORTED_WCHAR) [767] (NEW) 767 Allow zero-width Unicode characters on output (UNICODE_COMBINING_WCHARS) [N/y/?] (NEW) n Allow wide Unicode characters on output (UNICODE_WIDE_WCHARS) [N/y/?] (NEW) n Bidirectional character-aware line input (UNICODE_BIDI_SUPPORT) [N/y/?] (NEW) n Make it possible to enter sequences of chars which are not Unicode (UNICODE_PRESERVE_BROKEN) [N/y/?] (NEW) n * * Applets * * * Archival Utilities * Make tar, rpm, modprobe etc understand .xz data (FEATURE_SEAMLESS_XZ) [Y/n] (NEW) y Make tar, rpm, modprobe etc understand .lzma data (FEATURE_SEAMLESS_LZMA) [Y/n] (NEW) y Make tar, rpm, modprobe etc understand .bz2 data (FEATURE_SEAMLESS_BZ2) [Y/n] (NEW) y Make tar, rpm, modprobe etc understand .gz data (FEATURE_SEAMLESS_GZ) [Y] (NEW) y Make tar, rpm, modprobe etc understand .Z data (FEATURE_SEAMLESS_Z) [N/y] (NEW) n ar (9.5 kb) (AR) [N/y/?] (NEW) n uncompress (7.1 kb) (UNCOMPRESS) [N/y/?] (NEW) n gunzip (11 kb) (GUNZIP) [Y/n/?] (NEW) y zcat (24 kb) (ZCAT) [Y/n/?] (NEW) y Enable long options (FEATURE_GUNZIP_LONG_OPTIONS) [Y/n] (NEW) y bunzip2 (8.7 kb) (BUNZIP2) [Y/n/?] (NEW) y bzcat (8.7 kb) (BZCAT) [Y/n/?] (NEW) y unlzma (7.5 kb) (UNLZMA) [Y/n/?] (NEW) y lzcat (7.5 kb) (LZCAT) [Y/n/?] (NEW) y lzma -d (LZMA) [Y/n/?] (NEW) y unxz (13 kb) (UNXZ) [Y/n/?] (NEW) y xzcat (13 kb) (XZCAT) [Y/n/?] (NEW) y xz -d (XZ) [Y/n/?] (NEW) y bzip2 (16 kb) (BZIP2) [Y/n/?] (NEW) y Trade bytes for speed (0:fast, 9:small) (BZIP2_SMALL) [8] (NEW) 8 Enable decompression (FEATURE_BZIP2_DECOMPRESS) [Y/?] (NEW) y cpio (15 kb) (CPIO) [Y/n/?] (NEW) y Support archive creation (FEATURE_CPIO_O) [Y/n/?] (NEW) y Support passthrough mode (FEATURE_CPIO_P) [Y/n/?] (NEW) y Support --ignore-devno like GNU cpio (FEATURE_CPIO_IGNORE_DEVNO) [Y/n/?] (NEW) y Support --renumber-inodes like GNU cpio (FEATURE_CPIO_RENUMBER_INODES) [Y/n/?] (NEW) y dpkg (43 kb) (DPKG) [Y/n/?] (NEW) y dpkg-deb (30 kb) (DPKG_DEB) [Y/n/?] (NEW) y gzip (17 kb) (GZIP) [Y/n/?] (NEW) y Enable long options (FEATURE_GZIP_LONG_OPTIONS) [Y/n] (NEW) y Trade memory for speed (0:small,slow - 2:fast,big) (GZIP_FAST) [0] (NEW) 0 Enable compression levels (FEATURE_GZIP_LEVELS) [N/y/?] (NEW) n Enable decompression (FEATURE_GZIP_DECOMPRESS) [Y/?] (NEW) y lzop (12 kb) (LZOP) [Y/n/?] (NEW) y unlzop (13 kb) (UNLZOP) [N/y/?] (NEW) n lzopcat (13 kb) (LZOPCAT) [N/y/?] (NEW) n lzop compression levels 7,8,9 (not very useful) (LZOP_COMPR_HIGH) [N/y/?] (NEW) n rpm (32 kb) (RPM) [Y/n/?] (NEW) y rpm2cpio (21 kb) (RPM2CPIO) [Y/n/?] (NEW) y tar (39 kb) (TAR) [Y/n/?] (NEW) y Enable long options (FEATURE_TAR_LONG_OPTIONS) [Y/n] (NEW) y Enable -c (archive creation) (FEATURE_TAR_CREATE) [Y/n] (NEW) y Autodetect compressed tarballs (FEATURE_TAR_AUTODETECT) [Y/n/?] (NEW) y Enable -X (exclude from) and -T (include from) options (FEATURE_TAR_FROM) [Y/n/?] (NEW) y Support old tar header format (FEATURE_TAR_OLDGNU_COMPATIBILITY) [Y/n/?] (NEW) y Enable untarring of tarballs with checksums produced by buggy Sun tar (FEATURE_TAR_OLDSUN_COMPATIBILITY) [Y/n/?] (NEW) y Support GNU tar extensions (long filenames) (FEATURE_TAR_GNU_EXTENSIONS) [Y/n] (NEW) y Support writing to an external program (--to-command) (FEATURE_TAR_TO_COMMAND) [Y/n/?] (NEW) y Enable use of user and group names (FEATURE_TAR_UNAME_GNAME) [Y/n/?] (NEW) y Enable -m (do not preserve time) GNU option (FEATURE_TAR_NOPRESERVE_TIME) [Y/n] (NEW) y unzip (26 kb) (UNZIP) [Y/n/?] (NEW) y Read and use Central Directory data (FEATURE_UNZIP_CDF) [Y/n/?] (NEW) y Support compression method 12 (bzip2) (FEATURE_UNZIP_BZIP2) [Y/n] (NEW) y Support compression method 14 (lzma) (FEATURE_UNZIP_LZMA) [Y/n] (NEW) y Support compression method 95 (xz) (FEATURE_UNZIP_XZ) [Y/n] (NEW) y Optimize lzma for speed (FEATURE_LZMA_FAST) [N/y/?] (NEW) n * * Coreutils * Support verbose options (usually -v) for various applets (FEATURE_VERBOSE) [Y/n/?] (NEW) y * * Common options for date and touch * Allow timezone in dates (FEATURE_TIMEZONE) [Y/n/?] (NEW) y * * Common options for cp and mv * Preserve hard links (FEATURE_PRESERVE_HARDLINKS) [Y/n/?] (NEW) y * * Common options for df, du, ls * Support human readable output (example 13k, 23M, 235G) (FEATURE_HUMAN_READABLE) [Y/n/?] (NEW) y basename (438 bytes) (BASENAME) [Y/n/?] (NEW) y cat (5.6 kb) (CAT) [Y/n/?] (NEW) y Enable -n and -b options (FEATURE_CATN) [Y/n/?] (NEW) y cat -v[etA] (FEATURE_CATV) [Y/n/?] (NEW) y chgrp (7.6 kb) (CHGRP) [Y/n/?] (NEW) y chmod (5.5 kb) (CHMOD) [Y/n/?] (NEW) y chown (7.6 kb) (CHOWN) [Y/n/?] (NEW) y Enable long options (FEATURE_CHOWN_LONG_OPTIONS) [Y/n] (NEW) y chroot (3.7 kb) (CHROOT) [Y/n/?] (NEW) y cksum (4.1 kb) (CKSUM) [Y/n] (NEW) y crc32 (4.1 kb) (CRC32) [Y/n] (NEW) y comm (4.2 kb) (COMM) [Y/n/?] (NEW) y cp (10 kb) (CP) [Y/n/?] (NEW) y Enable long options (FEATURE_CP_LONG_OPTIONS) [Y/n/?] (NEW) y Enable --reflink[=auto] (FEATURE_CP_REFLINK) [Y/n] (NEW) y cut (5.8 kb) (CUT) [Y/n/?] (NEW) y cut -F (FEATURE_CUT_REGEX) [Y/n/?] (NEW) y date (7 kb) (DATE) [Y/n/?] (NEW) y Enable ISO date format output (-I) (FEATURE_DATE_ISOFMT) [Y/n/?] (NEW) y Support %[num]N nanosecond format specifier (FEATURE_DATE_NANO) [N/y/?] (NEW) n Support weird 'date MMDDhhmm[[YY]YY][.ss]' format (FEATURE_DATE_COMPAT) [Y/n/?] (NEW) y dd (7.5 kb) (DD) [Y/n/?] (NEW) y Enable signal handling for status reporting (FEATURE_DD_SIGNAL_HANDLING) [Y/n/?] (NEW) y Enable the third status line upon signal (FEATURE_DD_THIRD_STATUS_LINE) [Y/n/?] (NEW) y Enable ibs, obs, iflag, oflag and conv options (FEATURE_DD_IBS_OBS) [Y/n/?] (NEW) y Enable status display options (FEATURE_DD_STATUS) [Y/n/?] (NEW) y df (6.8 kb) (DF) [Y/n/?] (NEW) y Enable -a, -i, -B (FEATURE_DF_FANCY) [Y/n/?] (NEW) y Skip rootfs in mount table (FEATURE_SKIP_ROOTFS) [Y/n/?] (NEW) y dirname (329 bytes) (DIRNAME) [Y/n/?] (NEW) y dos2unix (5.2 kb) (DOS2UNIX) [Y/n/?] (NEW) y unix2dos (5.2 kb) (UNIX2DOS) [Y/n/?] (NEW) y du (6.3 kb) (DU) [Y/n/?] (NEW) y Use default blocksize of 1024 bytes (else it's 512 bytes) (FEATURE_DU_DEFAULT_BLOCKSIZE_1K) [Y/n] (NEW) y echo (1.8 kb) (ECHO) [Y/n/?] (NEW) y Enable -n and -e options (FEATURE_FANCY_ECHO) [Y/n] (NEW) y env (4 kb) (ENV) [Y/n/?] (NEW) y expand (5.1 kb) (EXPAND) [Y/n/?] (NEW) y unexpand (5.3 kb) (UNEXPAND) [Y/n/?] (NEW) y expr (6.6 kb) (EXPR) [Y/n/?] (NEW) y Extend Posix numbers support to 64 bit (EXPR_MATH_SUPPORT_64) [Y/n/?] (NEW) y factor (2.7 kb) (FACTOR) [Y/n/?] (NEW) y false (tiny) (FALSE) [Y/n/?] (NEW) y fold (4.6 kb) (FOLD) [Y/n/?] (NEW) y head (3.8 kb) (HEAD) [Y/n/?] (NEW) y Enable -c, -q, and -v (FEATURE_FANCY_HEAD) [Y/n] (NEW) y hostid (286 bytes) (HOSTID) [Y/n/?] (NEW) y id (7 kb) (ID) [Y/n/?] (NEW) y groups (6.7 kb) (GROUPS) [Y/n/?] (NEW) y install (12 kb) (INSTALL) [Y/n/?] (NEW) y Enable long options (FEATURE_INSTALL_LONG_OPTIONS) [Y/n] (NEW) y link (3.2 kb) (LINK) [Y/n/?] (NEW) y ln (4.9 kb) (LN) [Y/n/?] (NEW) y logname (1.1 kb) (LOGNAME) [Y/n/?] (NEW) y ls (14 kb) (LS) [Y/n/?] (NEW) y Enable filetyping options (-p and -F) (FEATURE_LS_FILETYPES) [Y/n] (NEW) y Enable symlinks dereferencing (-L) (FEATURE_LS_FOLLOWLINKS) [Y/n] (NEW) y Enable recursion (-R) (FEATURE_LS_RECURSIVE) [Y/n] (NEW) y Enable -w WIDTH and window size autodetection (FEATURE_LS_WIDTH) [Y/n] (NEW) y Sort the file names (FEATURE_LS_SORTFILES) [Y/n/?] (NEW) y Show file timestamps (FEATURE_LS_TIMESTAMPS) [Y/n/?] (NEW) y Show username/groupnames (FEATURE_LS_USERNAME) [Y/n/?] (NEW) y Allow use of color to identify file types (FEATURE_LS_COLOR) [Y/n/?] (NEW) y Produce colored ls output by default (FEATURE_LS_COLOR_IS_DEFAULT) [Y/n/?] (NEW) y md5sum (6.5 kb) (MD5SUM) [Y/n/?] (NEW) y sha1sum (5.9 kb) (SHA1SUM) [Y/n/?] (NEW) y sha256sum (7 kb) (SHA256SUM) [Y/n/?] (NEW) y sha512sum (7.4 kb) (SHA512SUM) [Y/n/?] (NEW) y sha3sum (6.1 kb) (SHA3SUM) [Y/n/?] (NEW) y * * Common options for md5sum, sha1sum, sha256sum, sha512sum, sha3sum * Enable -c, -s and -w options (FEATURE_MD5_SHA1_SUM_CHECK) [Y/n/?] (NEW) y mkdir (4.5 kb) (MKDIR) [Y/n/?] (NEW) y mkfifo (3.8 kb) (MKFIFO) [Y/n/?] (NEW) y mknod (4.5 kb) (MKNOD) [Y/n/?] (NEW) y mktemp (4.2 kb) (MKTEMP) [Y/n/?] (NEW) y mv (10 kb) (MV) [Y/n/?] (NEW) y nice (2.1 kb) (NICE) [Y/n/?] (NEW) y nl (4.6 kb) (NL) [Y/n/?] (NEW) y nohup (2 kb) (NOHUP) [Y/n/?] (NEW) y nproc (3.7 kb) (NPROC) [Y/n/?] (NEW) y od (11 kb) (OD) [Y/n/?] (NEW) y paste (4.9 kb) (PASTE) [Y/n/?] (NEW) y printenv (1.3 kb) (PRINTENV) [Y/n/?] (NEW) y printf (3.8 kb) (PRINTF) [Y/n/?] (NEW) y pwd (3.7 kb) (PWD) [Y/n/?] (NEW) y readlink (4 kb) (READLINK) [Y/n/?] (NEW) y Enable canonicalization by following all symlinks (-f) (FEATURE_READLINK_FOLLOW) [Y/n/?] (NEW) y realpath (1.6 kb) (REALPATH) [Y/n/?] (NEW) y rm (5.4 kb) (RM) [Y/n/?] (NEW) y rmdir (3.5 kb) (RMDIR) [Y/n/?] (NEW) y seq (3.8 kb) (SEQ) [Y/n/?] (NEW) y shred (4.9 kb) (SHRED) [Y/n/?] (NEW) y shuf (5.4 kb) (SHUF) [Y/n/?] (NEW) y sleep (2 kb) (SLEEP) [Y/n/?] (NEW) y Enable multiple arguments and s/m/h/d suffixes (FEATURE_FANCY_SLEEP) [Y/n/?] (NEW) y sort (7.7 kb) (SORT) [Y/n/?] (NEW) y Full SuSv3 compliant sort (support -ktcbdfiogM) (FEATURE_SORT_BIG) [Y/n/?] (NEW) y Use less memory (but might be slower) (FEATURE_SORT_OPTIMIZE_MEMORY) [N/y/?] (NEW) n split (5 kb) (SPLIT) [Y/n/?] (NEW) y Fancy extensions (FEATURE_SPLIT_FANCY) [Y/n/?] (NEW) y stat (11 kb) (STAT) [Y/n/?] (NEW) y Enable custom formats (-c) (FEATURE_STAT_FORMAT) [Y/n/?] (NEW) y Enable display of filesystem status (-f) (FEATURE_STAT_FILESYSTEM) [Y/n/?] (NEW) y stty (8.9 kb) (STTY) [Y/n/?] (NEW) y sum (4 kb) (SUM) [Y/n/?] (NEW) y sync (3.8 kb) (SYNC) [Y/n/?] (NEW) y Enable -d and -f flags (requires syncfs(2) in libc) (FEATURE_SYNC_FANCY) [Y/n/?] (NEW) y fsync (3.6 kb) (FSYNC) [Y/n/?] (NEW) y tac (3.9 kb) (TAC) [Y/n/?] (NEW) y tail (6.8 kb) (TAIL) [Y/n/?] (NEW) y Enable -q, -s, -v, and -F options (FEATURE_FANCY_TAIL) [Y/n/?] (NEW) y tee (4.2 kb) (TEE) [Y/n/?] (NEW) y Enable block I/O (larger/faster) instead of byte I/O (FEATURE_TEE_USE_BLOCK_IO) [Y/n/?] (NEW) y test (4.1 kb) (TEST) [Y/n/?] (NEW) y test as [ (TEST1) [Y/n/?] (NEW) y test as [[ (TEST2) [Y/n/?] (NEW) y Extend test to 64 bit (FEATURE_TEST_64) [Y/n/?] (NEW) y timeout (6 kb) (TIMEOUT) [Y/n/?] (NEW) y touch (5.9 kb) (TOUCH) [Y/n/?] (NEW) y Add support for SUSV3 features (-a -d -m -t -r) (FEATURE_TOUCH_SUSV3) [Y/n/?] (NEW) y tr (5.1 kb) (TR) [Y/n/?] (NEW) y Enable character classes (such as [:upper:]) (FEATURE_TR_CLASSES) [Y/n/?] (NEW) y Enable equivalence classes (FEATURE_TR_EQUIV) [Y/n/?] (NEW) y true (tiny) (TRUE) [Y/n/?] (NEW) y truncate (4.2 kb) (TRUNCATE) [Y/n/?] (NEW) y tty (3.6 kb) (TTY) [Y/n/?] (NEW) y uname (3.9 kb) (UNAME) [Y/n/?] (NEW) y Operating system name (UNAME_OSNAME) [GNU/Linux] (NEW) GNU/Linux arch (1.1 kb) (BB_ARCH) [Y/n/?] (NEW) y uniq (4.9 kb) (UNIQ) [Y/n/?] (NEW) y unlink (3.2 kb) (UNLINK) [Y/n/?] (NEW) y usleep (1.3 kb) (USLEEP) [Y/n/?] (NEW) y uudecode (5.8 kb) (UUDECODE) [Y/n/?] (NEW) y base32 (4.9 kb) (BASE32) [Y/n/?] (NEW) y base64 (4.9 kb) (BASE64) [Y/n/?] (NEW) y uuencode (4.4 kb) (UUENCODE) [Y/n/?] (NEW) y wc (4.5 kb) (WC) [Y/n/?] (NEW) y Support very large counts (FEATURE_WC_LARGE) [Y/n/?] (NEW) y who (3.9 kb) (WHO) [Y/n/?] (NEW) y w (3.8 kb) (W) [Y/n/?] (NEW) y users (3.4 kb) (USERS) [Y/n/?] (NEW) y whoami (3.2 kb) (WHOAMI) [Y/n/?] (NEW) y yes (1.2 kb) (YES) [Y/n/?] (NEW) y * * Console Utilities * chvt (2 kb) (CHVT) [Y/n/?] (NEW) y clear (tiny) (CLEAR) [Y/n/?] (NEW) y deallocvt (1.9 kb) (DEALLOCVT) [Y/n/?] (NEW) y dumpkmap (1.6 kb) (DUMPKMAP) [Y/n/?] (NEW) y fgconsole (1.5 kb) (FGCONSOLE) [Y/n/?] (NEW) y kbd_mode (4.1 kb) (KBD_MODE) [Y/n/?] (NEW) y loadfont (5.2 kb) (LOADFONT) [Y/n/?] (NEW) y setfont (24 kb) (SETFONT) [Y/n/?] (NEW) y Support reading textual screen maps (FEATURE_SETFONT_TEXTUAL_MAP) [Y/n/?] (NEW) y Default directory for console-tools files (DEFAULT_SETFONT_DIR) [] (NEW) * * Common options for loadfont and setfont * Support PSF2 console fonts (FEATURE_LOADFONT_PSF2) [Y/n] (NEW) y Support old (raw) console fonts (FEATURE_LOADFONT_RAW) [Y/n] (NEW) y loadkmap (1.8 kb) (LOADKMAP) [Y/n/?] (NEW) y openvt (7.2 kb) (OPENVT) [Y/n/?] (NEW) y reset (345 bytes) (RESET) [Y/n/?] (NEW) y resize (903 bytes) (RESIZE) [Y/n/?] (NEW) y Print environment variables (FEATURE_RESIZE_PRINT) [Y/n/?] (NEW) y setconsole (3.6 kb) (SETCONSOLE) [Y/n/?] (NEW) y Enable long options (FEATURE_SETCONSOLE_LONG_OPTIONS) [Y/n] (NEW) y setkeycodes (2.1 kb) (SETKEYCODES) [Y/n/?] (NEW) y setlogcons (1.8 kb) (SETLOGCONS) [Y/n/?] (NEW) y showkey (4.7 kb) (SHOWKEY) [Y/n/?] (NEW) y * * Debian Utilities * pipe_progress (275 bytes) (PIPE_PROGRESS) [Y/n/?] (NEW) y run-parts (6.1 kb) (RUN_PARTS) [Y/n/?] (NEW) y Enable long options (FEATURE_RUN_PARTS_LONG_OPTIONS) [Y/n] (NEW) y Support additional arguments (FEATURE_RUN_PARTS_FANCY) [Y/n/?] (NEW) y start-stop-daemon (12 kb) (START_STOP_DAEMON) [Y/n/?] (NEW) y Enable long options (FEATURE_START_STOP_DAEMON_LONG_OPTIONS) [Y/n] (NEW) y Support additional arguments (FEATURE_START_STOP_DAEMON_FANCY) [Y/n/?] (NEW) y which (3.8 kb) (WHICH) [Y/n/?] (NEW) y * * klibc-utils * minips (11 kb) (MINIPS) [N/y/?] (NEW) n nuke (2.9 kb) (NUKE) [N/y/?] (NEW) n resume (3.2 kb) (RESUME) [Y/n/?] (NEW) y run-init (7.7 kb) (RUN_INIT) [Y/n/?] (NEW) y * * Editors * awk (23 kb) (AWK) [Y/n/?] (NEW) y Enable math functions (requires libm) (FEATURE_AWK_LIBM) [Y/n/?] (NEW) y Enable a few GNU extensions (FEATURE_AWK_GNU_EXTENSIONS) [Y/n/?] (NEW) y cmp (4.9 kb) (CMP) [Y/n/?] (NEW) y diff (13 kb) (DIFF) [Y/n/?] (NEW) y Enable long options (FEATURE_DIFF_LONG_OPTIONS) [Y/n] (NEW) y Enable directory support (FEATURE_DIFF_DIR) [Y/n/?] (NEW) y ed (21 kb) (ED) [Y/n/?] (NEW) y patch (9.4 kb) (PATCH) [Y/n/?] (NEW) y sed (12 kb) (SED) [Y/n/?] (NEW) y vi (23 kb) (VI) [Y/n/?] (NEW) y Maximum screen width (FEATURE_VI_MAX_LEN) [4096] (NEW) 4096 Allow to display 8-bit chars (otherwise shows dots) (FEATURE_VI_8BIT) [N/y/?] (NEW) n Enable ":" colon commands (no "ex" mode) (FEATURE_VI_COLON) [Y/n/?] (NEW) y Expand "%" and "#" in colon commands (FEATURE_VI_COLON_EXPAND) [Y/n/?] (NEW) y Enable yank/put commands and mark cmds (FEATURE_VI_YANKMARK) [Y/n/?] (NEW) y Enable search and replace cmds (FEATURE_VI_SEARCH) [Y/n/?] (NEW) y Enable regex in search and replace (FEATURE_VI_REGEX_SEARCH) [N/y/?] (NEW) n Catch signals (FEATURE_VI_USE_SIGNALS) [Y/n/?] (NEW) y Remember previous cmd and "." cmd (FEATURE_VI_DOT_CMD) [Y/n/?] (NEW) y Enable -R option and "view" mode (FEATURE_VI_READONLY) [Y/n/?] (NEW) y Enable settable options, ai ic showmatch (FEATURE_VI_SETOPTS) [Y/n/?] (NEW) y Support :set (FEATURE_VI_SET) [Y/n] (NEW) y Handle window resize (FEATURE_VI_WIN_RESIZE) [Y/n/?] (NEW) y Use 'tell me cursor position' ESC sequence to measure window (FEATURE_VI_ASK_TERMINAL) [Y/n/?] (NEW) y Support undo command "u" (FEATURE_VI_UNDO) [Y/n/?] (NEW) y Enable undo operation queuing (FEATURE_VI_UNDO_QUEUE) [Y/n/?] (NEW) y Maximum undo character queue size (FEATURE_VI_UNDO_QUEUE_MAX) [256] (NEW) 256 Enable verbose status reporting (FEATURE_VI_VERBOSE_STATUS) [Y/n/?] (NEW) y Allow vi and awk to execute shell commands (FEATURE_ALLOW_EXEC) [Y/n/?] (NEW) y * * Finding Utilities * find (14 kb) (FIND) [Y/n/?] (NEW) y Enable -print0: NUL-terminated output (FEATURE_FIND_PRINT0) [Y/n/?] (NEW) y Enable -mtime: modification time matching (FEATURE_FIND_MTIME) [Y/n/?] (NEW) y Enable -atime: access time matching (FEATURE_FIND_ATIME) [Y/n/?] (NEW) y Enable -ctime: status change timestamp matching (FEATURE_FIND_CTIME) [Y/n/?] (NEW) y Enable -mmin: modification time matching by minutes (FEATURE_FIND_MMIN) [Y/n/?] (NEW) y Enable -amin: access time matching by minutes (FEATURE_FIND_AMIN) [Y/n/?] (NEW) y Enable -cmin: status change timestamp matching by minutes (FEATURE_FIND_CMIN) [Y/n/?] (NEW) y Enable -perm: permissions matching (FEATURE_FIND_PERM) [Y/n] (NEW) y Enable -type: file type matching (file/dir/link/...) (FEATURE_FIND_TYPE) [Y/n/?] (NEW) y Enable -executable: file is executable (FEATURE_FIND_EXECUTABLE) [Y/n] (NEW) y Enable -xdev: 'stay in filesystem' (FEATURE_FIND_XDEV) [Y/n] (NEW) y Enable -mindepth N and -maxdepth N (FEATURE_FIND_MAXDEPTH) [Y/n] (NEW) y Enable -newer: compare file modification times (FEATURE_FIND_NEWER) [Y/n/?] (NEW) y Enable -inum: inode number matching (FEATURE_FIND_INUM) [Y/n] (NEW) y Enable -samefile: reference file matching (FEATURE_FIND_SAMEFILE) [Y/n/?] (NEW) y Enable -exec: execute commands (FEATURE_FIND_EXEC) [Y/n/?] (NEW) y Enable -exec ... {} + (FEATURE_FIND_EXEC_PLUS) [Y/n/?] (NEW) y Enable -user: username/uid matching (FEATURE_FIND_USER) [Y/n] (NEW) y Enable -group: group/gid matching (FEATURE_FIND_GROUP) [Y/n] (NEW) y Enable the 'not' (!) operator (FEATURE_FIND_NOT) [Y/n/?] (NEW) y Enable -depth (FEATURE_FIND_DEPTH) [Y/n/?] (NEW) y Enable parens in options (FEATURE_FIND_PAREN) [Y/n/?] (NEW) y Enable -size: file size matching (FEATURE_FIND_SIZE) [Y/n] (NEW) y Enable -prune: exclude subdirectories (FEATURE_FIND_PRUNE) [Y/n/?] (NEW) y Enable -quit: exit (FEATURE_FIND_QUIT) [Y/n/?] (NEW) y Enable -delete: delete files/dirs (FEATURE_FIND_DELETE) [Y/n/?] (NEW) y Enable -empty: match empty files or directories (FEATURE_FIND_EMPTY) [Y/n/?] (NEW) y Enable -path: match pathname with shell pattern (FEATURE_FIND_PATH) [Y/n/?] (NEW) y Enable -regex: match pathname with regex (FEATURE_FIND_REGEX) [Y/n/?] (NEW) y Enable -links: link count matching (FEATURE_FIND_LINKS) [Y/n/?] (NEW) y grep (8.6 kb) (GREP) [Y/n/?] (NEW) y egrep (7.8 kb) (EGREP) [Y/n/?] (NEW) y fgrep (7.8 kb) (FGREP) [Y/n/?] (NEW) y Enable before and after context flags (-A, -B and -C) (FEATURE_GREP_CONTEXT) [Y/n/?] (NEW) y xargs (7.2 kb) (XARGS) [Y/n/?] (NEW) y Enable -p: prompt and confirmation (FEATURE_XARGS_SUPPORT_CONFIRMATION) [Y/n/?] (NEW) y Enable single and double quotes and backslash (FEATURE_XARGS_SUPPORT_QUOTES) [Y/n/?] (NEW) y Enable -x: exit if -s or -n is exceeded (FEATURE_XARGS_SUPPORT_TERMOPT) [Y/n/?] (NEW) y Enable -0: NUL-terminated input (FEATURE_XARGS_SUPPORT_ZERO_TERM) [Y/n/?] (NEW) y Enable -I STR: string to replace (FEATURE_XARGS_SUPPORT_REPL_STR) [Y/n/?] (NEW) y Enable -P N: processes to run in parallel (FEATURE_XARGS_SUPPORT_PARALLEL) [Y/n] (NEW) y Enable -a FILE: use FILE instead of stdin (FEATURE_XARGS_SUPPORT_ARGS_FILE) [Y/n] (NEW) y * * Init Utilities * bootchartd (10 kb) (BOOTCHARTD) [Y/n/?] (NEW) y Compatible, bloated header (FEATURE_BOOTCHARTD_BLOATED_HEADER) [Y/n/?] (NEW) y Support bootchartd.conf (FEATURE_BOOTCHARTD_CONFIG_FILE) [Y/n/?] (NEW) y halt (4 kb) (HALT) [Y/n/?] (NEW) y poweroff (4 kb) (POWEROFF) [Y/n/?] (NEW) y reboot (4 kb) (REBOOT) [Y/n/?] (NEW) y Before signaling init, make sure it is ready for it (FEATURE_WAIT_FOR_INIT) [Y/n/?] (NEW) y init (10 kb) (INIT) [Y/n/?] (NEW) y linuxrc: support running init from initrd (not initramfs) (LINUXRC) [Y/n/?] (NEW) y Support reading an inittab file (FEATURE_USE_INITTAB) [Y/n/?] (NEW) y Support killing processes that have been removed from inittab (FEATURE_KILL_REMOVED) [N/y/?] (NEW) n Run commands with leading dash with controlling tty (FEATURE_INIT_SCTTY) [Y/n/?] (NEW) y Enable init to write to syslog (FEATURE_INIT_SYSLOG) [Y/n/?] (NEW) y Be quiet on boot (no 'init started:' message) (FEATURE_INIT_QUIET) [Y/n] (NEW) y Support dumping core for child processes (debugging only) (FEATURE_INIT_COREDUMPS) [N/y/?] (NEW) n Initial terminal type (INIT_TERMINAL_TYPE) [linux] (NEW) linux Clear init's command line (FEATURE_INIT_MODIFY_CMDLINE) [Y/n/?] (NEW) y * * Login/Password Management Utilities * Support shadow passwords (FEATURE_SHADOWPASSWDS) [Y/n/?] (NEW) y Use internal password and group functions rather than system functions (USE_BB_PWD_GRP) [Y/n/?] (NEW) y Use internal shadow password functions (USE_BB_SHADOW) [Y/n/?] (NEW) y Use internal crypt functions (USE_BB_CRYPT) [Y/n/?] (NEW) y Enable SHA256/512 crypt functions (USE_BB_CRYPT_SHA) [Y/n/?] (NEW) y add-shell (3.1 kb) (ADD_SHELL) [Y/n/?] (NEW) y remove-shell (3 kb) (REMOVE_SHELL) [Y/n/?] (NEW) y addgroup (8.6 kb) (ADDGROUP) [Y/n/?] (NEW) y Support adding users to groups (FEATURE_ADDUSER_TO_GROUP) [Y/n/?] (NEW) y adduser (15 kb) (ADDUSER) [Y/n/?] (NEW) y Enable sanity check on user/group names in adduser and addgroup (FEATURE_CHECK_NAMES) [N/y/?] (NEW) n Last valid uid or gid for adduser and addgroup (LAST_ID) [60000] (NEW) 60000 First valid system uid or gid for adduser and addgroup (FIRST_SYSTEM_ID) [100] (NEW) 100 Last valid system uid or gid for adduser and addgroup (LAST_SYSTEM_ID) [999] (NEW) 999 chpasswd (18 kb) (CHPASSWD) [Y/n/?] (NEW) y Default encryption method (passwd -a, cryptpw -m, chpasswd -c ALG) (FEATURE_DEFAULT_PASSWD_ALGO) [des] (NEW) des cryptpw (14 kb) (CRYPTPW) [Y/n/?] (NEW) y mkpasswd (15 kb) (MKPASSWD) [Y/n/?] (NEW) y deluser (9.1 kb) (DELUSER) [Y/n/?] (NEW) y delgroup (6.4 kb) (DELGROUP) [Y/n/?] (NEW) y Support removing users from groups (FEATURE_DEL_USER_FROM_GROUP) [Y/n/?] (NEW) y getty (10 kb) (GETTY) [Y/n/?] (NEW) y login (24 kb) (LOGIN) [Y/n/?] (NEW) y Run logged in session in a child process (LOGIN_SESSION_AS_CHILD) [N/y/?] (NEW) n Support login scripts (LOGIN_SCRIPTS) [Y/n/?] (NEW) y Support /etc/nologin (FEATURE_NOLOGIN) [Y/n/?] (NEW) y Support /etc/securetty (FEATURE_SECURETTY) [Y/n/?] (NEW) y passwd (21 kb) (PASSWD) [Y/n/?] (NEW) y Check new passwords for weakness (FEATURE_PASSWD_WEAK_CHECK) [Y/n/?] (NEW) y su (19 kb) (SU) [Y/n/?] (NEW) y Log to syslog all attempts to use su (FEATURE_SU_SYSLOG) [Y/n] (NEW) y If user's shell is not in /etc/shells, disallow -s PROG (FEATURE_SU_CHECKS_SHELLS) [Y/n] (NEW) y Allow blank passwords only on TTYs in /etc/securetty (FEATURE_SU_BLANK_PW_NEEDS_SECURE_TTY) [N/y] (NEW) n sulogin (17 kb) (SULOGIN) [Y/n/?] (NEW) y vlock (17 kb) (VLOCK) [Y/n/?] (NEW) y * * Linux Ext2 FS Progs * chattr (3.8 kb) (CHATTR) [Y/n/?] (NEW) y fsck (7.4 kb) (FSCK) [Y/n/?] (NEW) y lsattr (5.5 kb) (LSATTR) [Y/n/?] (NEW) y tune2fs (4.4 kb) (TUNE2FS) [N/y/?] (NEW) n * * Linux Module Utilities * Simplified modutils (MODPROBE_SMALL) [Y/n/?] (NEW) y depmod (27 kb) (DEPMOD) [Y/n/?] (NEW) y insmod (22 kb) (INSMOD) [Y/n/?] (NEW) y lsmod (1.9 kb) (LSMOD) [Y/n/?] (NEW) y modinfo (24 kb) (MODINFO) [Y/n/?] (NEW) y modprobe (28 kb) (MODPROBE) [Y/n/?] (NEW) y rmmod (3.3 kb) (RMMOD) [Y/n/?] (NEW) y * * Options common to multiple modutils * Accept module options on modprobe command line (FEATURE_CMDLINE_MODULE_OPTIONS) [Y/n/?] (NEW) y Skip loading of already loaded modules (FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED) [Y/n/?] (NEW) y Default directory containing modules (DEFAULT_MODULES_DIR) [/lib/modules] (NEW) /lib/modules Default name of modules.dep (DEFAULT_DEPMOD_FILE) [modules.dep] (NEW) modules.dep * * Linux System Utilities * acpid (9 kb) (ACPID) [Y/n/?] (NEW) y Accept and ignore redundant options (FEATURE_ACPID_COMPAT) [Y/n/?] (NEW) y blkdiscard (4.3 kb) (BLKDISCARD) [Y/n/?] (NEW) y blkid (12 kb) (BLKID) [Y/n/?] (NEW) y Print filesystem type (FEATURE_BLKID_TYPE) [Y/n/?] (NEW) y blockdev (2.3 kb) (BLOCKDEV) [Y/n/?] (NEW) y cal (5.8 kb) (CAL) [Y/n/?] (NEW) y chrt (4.7 kb) (CHRT) [Y/n/?] (NEW) y dmesg (3.7 kb) (DMESG) [Y/n/?] (NEW) y Pretty output (FEATURE_DMESG_PRETTY) [Y/n/?] (NEW) y eject (4 kb) (EJECT) [Y/n/?] (NEW) y SCSI support (FEATURE_EJECT_SCSI) [Y/n/?] (NEW) y fallocate (4.1 kb) (FALLOCATE) [Y/n/?] (NEW) y fatattr (1.9 kb) (FATATTR) [Y/n/?] (NEW) y fbset (5.9 kb) (FBSET) [Y/n/?] (NEW) y Enable extra options (FEATURE_FBSET_FANCY) [Y/n/?] (NEW) y Enable readmode support (FEATURE_FBSET_READMODE) [Y/n/?] (NEW) y fdformat (4.4 kb) (FDFORMAT) [Y/n/?] (NEW) y fdisk (37 kb) (FDISK) [Y/n/?] (NEW) y Write support (FEATURE_FDISK_WRITABLE) [Y/n/?] (NEW) y Support AIX disklabels (FEATURE_AIX_LABEL) [N/y/?] (NEW) n Support SGI disklabels (FEATURE_SGI_LABEL) [N/y/?] (NEW) n Support SUN disklabels (FEATURE_SUN_LABEL) [N/y/?] (NEW) n Support BSD disklabels (FEATURE_OSF_LABEL) [N/y/?] (NEW) n Support GPT disklabels (FEATURE_GPT_LABEL) [N/y/?] (NEW) n Support expert mode (FEATURE_FDISK_ADVANCED) [Y/n/?] (NEW) y findfs (12 kb) (FINDFS) [Y/n/?] (NEW) y flock (6.3 kb) (FLOCK) [Y/n/?] (NEW) y fdflush (1.3 kb) (FDFLUSH) [Y/n/?] (NEW) y freeramdisk (1.3 kb) (FREERAMDISK) [Y/n/?] (NEW) y fsck.minix (13 kb) (FSCK_MINIX) [Y/n/?] (NEW) y fsfreeze (3.5 kb) (FSFREEZE) [Y/n/?] (NEW) y fstrim (4.4 kb) (FSTRIM) [Y/n/?] (NEW) y getopt (5.8 kb) (GETOPT) [Y/n/?] (NEW) y Support -l LONGOPTs (FEATURE_GETOPT_LONG) [Y/n/?] (NEW) y hexdump (8.6 kb) (HEXDUMP) [Y/n/?] (NEW) y hd (7.8 kb) (HD) [Y/n/?] (NEW) y xxd (8.9 kb) (XXD) [Y/n/?] (NEW) y hwclock (5.8 kb) (HWCLOCK) [Y/n/?] (NEW) y Use FHS /var/lib/hwclock/adjtime (FEATURE_HWCLOCK_ADJTIME_FHS) [N/y/?] (NEW) n ionice (3.8 kb) (IONICE) [Y/n/?] (NEW) y ipcrm (3.2 kb) (IPCRM) [Y/n/?] (NEW) y ipcs (11 kb) (IPCS) [Y/n/?] (NEW) y last (6.1 kb) (LAST) [Y/n/?] (NEW) y Output extra information (FEATURE_LAST_FANCY) [Y/n/?] (NEW) y losetup (5.5 kb) (LOSETUP) [Y/n/?] (NEW) y lspci (6.3 kb) (LSPCI) [Y/n/?] (NEW) y lsusb (4.2 kb) (LSUSB) [Y/n/?] (NEW) y mdev (17 kb) (MDEV) [Y/n/?] (NEW) y Support /etc/mdev.conf (FEATURE_MDEV_CONF) [Y/n/?] (NEW) y Support subdirs/symlinks (FEATURE_MDEV_RENAME) [Y/n/?] (NEW) y Support regular expressions substitutions when renaming device (FEATURE_MDEV_RENAME_REGEXP) [Y/n/?] (NEW) y Support command execution at device addition/removal (FEATURE_MDEV_EXEC) [Y/n/?] (NEW) y Support loading of firmware (FEATURE_MDEV_LOAD_FIRMWARE) [Y/n/?] (NEW) y Support daemon mode (FEATURE_MDEV_DAEMON) [Y/n/?] (NEW) y mesg (1.4 kb) (MESG) [Y/n/?] (NEW) y Enable writing to tty only by group, not by everybody (FEATURE_MESG_ENABLE_ONLY_GROUP) [Y/n/?] (NEW) y mke2fs (10 kb) (MKE2FS) [Y/n/?] (NEW) y mkfs.ext2 (10 kb) (MKFS_EXT2) [Y/n/?] (NEW) y mkfs.minix (10 kb) (MKFS_MINIX) [Y/n/?] (NEW) y Support Minix fs v2 (fsck_minix/mkfs_minix) (FEATURE_MINIX2) [Y/n/?] (NEW) y mkfs_reiser (MKFS_REISER) [N/y/?] (NEW) n mkdosfs (7.2 kb) (MKDOSFS) [Y/n/?] (NEW) y mkfs.vfat (7.2 kb) (MKFS_VFAT) [Y/n/?] (NEW) y mkswap (6.3 kb) (MKSWAP) [Y/n/?] (NEW) y UUID support (FEATURE_MKSWAP_UUID) [Y/n/?] (NEW) y more (7 kb) (MORE) [Y/n/?] (NEW) y mount (23 kb) (MOUNT) [Y/n/?] (NEW) y Support -f (fake mount) (FEATURE_MOUNT_FAKE) [Y/n/?] (NEW) y Support -v (verbose) (FEATURE_MOUNT_VERBOSE) [Y/n/?] (NEW) y Support mount helpers (FEATURE_MOUNT_HELPERS) [N/y/?] (NEW) n Support specifying devices by label or UUID (FEATURE_MOUNT_LABEL) [Y/n/?] (NEW) y Support mounting NFS file systems on Linux < 2.6.23 (FEATURE_MOUNT_NFS) [N/y/?] (NEW) n Support mounting CIFS/SMB file systems (FEATURE_MOUNT_CIFS) [Y/n/?] (NEW) y Support lots of -o flags (FEATURE_MOUNT_FLAGS) [Y/n/?] (NEW) y Support /etc/fstab and -a (mount all) (FEATURE_MOUNT_FSTAB) [Y/n/?] (NEW) y Support -T (FEATURE_MOUNT_OTHERTAB) [Y/n/?] (NEW) y mountpoint (4.9 kb) (MOUNTPOINT) [Y/n/?] (NEW) y nologin (NOLOGIN) [Y/n/?] (NEW) y Enable dependencies for nologin (NOLOGIN_DEPENDENCIES) [N/y/?] (NEW) n nsenter (6.5 kb) (NSENTER) [Y/n/?] (NEW) y pivot_root (1.1 kb) (PIVOT_ROOT) [Y/n/?] (NEW) y rdate (5.6 kb) (RDATE) [Y/n/?] (NEW) y rdev (1.8 kb) (RDEV) [Y/n/?] (NEW) y readprofile (7.1 kb) (READPROFILE) [Y/n/?] (NEW) y renice (4.2 kb) (RENICE) [Y/n/?] (NEW) y rev (4.4 kb) (REV) [Y/n/?] (NEW) y rtcwake (6.8 kb) (RTCWAKE) [Y/n/?] (NEW) y script (8.6 kb) (SCRIPT) [Y/n/?] (NEW) y scriptreplay (2.4 kb) (SCRIPTREPLAY) [Y/n/?] (NEW) y setarch (3.6 kb) (SETARCH) [Y/n/?] (NEW) y linux32 (3.3 kb) (LINUX32) [Y/n/?] (NEW) y linux64 (3.3 kb) (LINUX64) [Y/n/?] (NEW) y setpriv (6.6 kb) (SETPRIV) [Y/n/?] (NEW) y Support dumping current privilege state (FEATURE_SETPRIV_DUMP) [Y/n/?] (NEW) y Support capabilities (FEATURE_SETPRIV_CAPABILITIES) [Y/n/?] (NEW) y Support capability names (FEATURE_SETPRIV_CAPABILITY_NAMES) [Y/n/?] (NEW) y setsid (3.6 kb) (SETSID) [Y/n/?] (NEW) y swapon (15 kb) (SWAPON) [Y/n/?] (NEW) y Support discard option -d (FEATURE_SWAPON_DISCARD) [Y/n/?] (NEW) y Support priority option -p (FEATURE_SWAPON_PRI) [Y/n/?] (NEW) y swapoff (14 kb) (SWAPOFF) [Y/n] (NEW) y Support specifying devices by label or UUID (FEATURE_SWAPONOFF_LABEL) [Y/n/?] (NEW) y switch_root (5.5 kb) (SWITCH_ROOT) [Y/n/?] (NEW) y taskset (4.2 kb) (TASKSET) [Y/n/?] (NEW) y Fancy output (FEATURE_TASKSET_FANCY) [Y/n/?] (NEW) y CPU list support (-c option) (FEATURE_TASKSET_CPULIST) [Y/n/?] (NEW) y uevent (3.1 kb) (UEVENT) [Y/n/?] (NEW) y umount (5.1 kb) (UMOUNT) [Y/n/?] (NEW) y Support -a (unmount all) (FEATURE_UMOUNT_ALL) [Y/n/?] (NEW) y unshare (7.2 kb) (UNSHARE) [Y/n/?] (NEW) y wall (2.6 kb) (WALL) [Y/n/?] (NEW) y * * Common options for mount/umount * Support loopback mounts (FEATURE_MOUNT_LOOP) [Y/n/?] (NEW) y Create new loopback devices if needed (FEATURE_MOUNT_LOOP_CREATE) [Y/n/?] (NEW) y Support old /etc/mtab file (FEATURE_MTAB_SUPPORT) [N/y/?] (NEW) n * * Filesystem/Volume identification * bcache filesystem (FEATURE_VOLUMEID_BCACHE) [Y/n] (NEW) y btrfs filesystem (FEATURE_VOLUMEID_BTRFS) [Y/n] (NEW) y cramfs filesystem (FEATURE_VOLUMEID_CRAMFS) [Y/n] (NEW) y erofs filesystem (FEATURE_VOLUMEID_EROFS) [Y/n/?] (NEW) y exFAT filesystem (FEATURE_VOLUMEID_EXFAT) [Y/n/?] (NEW) y Ext filesystem (FEATURE_VOLUMEID_EXT) [Y/n] (NEW) y f2fs filesystem (FEATURE_VOLUMEID_F2FS) [Y/n/?] (NEW) y fat filesystem (FEATURE_VOLUMEID_FAT) [Y/n] (NEW) y hfs filesystem (FEATURE_VOLUMEID_HFS) [Y/n] (NEW) y iso9660 filesystem (FEATURE_VOLUMEID_ISO9660) [Y/n] (NEW) y jfs filesystem (FEATURE_VOLUMEID_JFS) [Y/n] (NEW) y LittleFS filesystem (FEATURE_VOLUMEID_LFS) [Y/n/?] (NEW) y linuxraid (FEATURE_VOLUMEID_LINUXRAID) [Y/n] (NEW) y linux swap filesystem (FEATURE_VOLUMEID_LINUXSWAP) [Y/n] (NEW) y luks filesystem (FEATURE_VOLUMEID_LUKS) [Y/n] (NEW) y minix filesystem (FEATURE_VOLUMEID_MINIX) [Y/n] (NEW) y nilfs filesystem (FEATURE_VOLUMEID_NILFS) [Y/n/?] (NEW) y ntfs filesystem (FEATURE_VOLUMEID_NTFS) [Y/n] (NEW) y ocfs2 filesystem (FEATURE_VOLUMEID_OCFS2) [Y/n] (NEW) y Reiser filesystem (FEATURE_VOLUMEID_REISERFS) [Y/n] (NEW) y romfs filesystem (FEATURE_VOLUMEID_ROMFS) [Y/n] (NEW) y SquashFS filesystem (FEATURE_VOLUMEID_SQUASHFS) [Y/n/?] (NEW) y sysv filesystem (FEATURE_VOLUMEID_SYSV) [Y/n] (NEW) y UBIFS filesystem (FEATURE_VOLUMEID_UBIFS) [Y/n/?] (NEW) y udf filesystem (FEATURE_VOLUMEID_UDF) [Y/n] (NEW) y xfs filesystem (FEATURE_VOLUMEID_XFS) [Y/n] (NEW) y * * Miscellaneous Utilities * adjtimex (4.7 kb) (ADJTIMEX) [Y/n/?] (NEW) y ascii (ASCII) [Y/n/?] (NEW) y bbconfig (9.7 kb) (BBCONFIG) [N/y/?] (NEW) n bc (45 kb) (BC) [Y/n/?] (NEW) y dc (36 kb) (DC) [Y/n/?] (NEW) y Use bc code base for dc (larger, more features) (FEATURE_DC_BIG) [Y] (NEW) y Interactive mode (+4kb) (FEATURE_BC_INTERACTIVE) [Y/n/?] (NEW) y Enable bc/dc long options (FEATURE_BC_LONG_OPTIONS) [Y/n] (NEW) y beep (2.4 kb) (BEEP) [Y/n/?] (NEW) y default frequency (FEATURE_BEEP_FREQ) [4000] (NEW) 4000 default length (FEATURE_BEEP_LENGTH_MS) [30] (NEW) 30 chat (6.3 kb) (CHAT) [Y/n/?] (NEW) y Enable NOFAIL expect strings (FEATURE_CHAT_NOFAIL) [Y/n/?] (NEW) y Force STDIN to be a TTY (FEATURE_CHAT_TTY_HIFI) [N/y/?] (NEW) n Enable implicit Carriage Return (FEATURE_CHAT_IMPLICIT_CR) [Y/n/?] (NEW) y Swallow options (FEATURE_CHAT_SWALLOW_OPTS) [Y/n/?] (NEW) y Support weird SEND escapes (FEATURE_CHAT_SEND_ESCAPES) [Y/n/?] (NEW) y Support variable-length ABORT conditions (FEATURE_CHAT_VAR_ABORT_LEN) [Y/n/?] (NEW) y Support revoking of ABORT conditions (FEATURE_CHAT_CLR_ABORT) [Y/n/?] (NEW) y conspy (10 kb) (CONSPY) [Y/n/?] (NEW) y crond (14 kb) (CROND) [Y/n/?] (NEW) y Support -d (redirect output to stderr) (FEATURE_CROND_D) [Y/n/?] (NEW) y Report command output via email (using sendmail) (FEATURE_CROND_CALL_SENDMAIL) [Y/n/?] (NEW) y Support special times (@reboot, @daily, etc) in crontabs (FEATURE_CROND_SPECIAL_TIMES) [Y/n/?] (NEW) y crond spool directory (FEATURE_CROND_DIR) [/var/spool/cron] (NEW) /var/spool/cron crontab (10 kb) (CRONTAB) [Y/n/?] (NEW) y devfsd (obsolete) (DEVFSD) [N/y/?] (NEW) n Use devfs names for all devices (obsolete) (FEATURE_DEVFS) [N/y/?] (NEW) n devmem (2.5 kb) (DEVMEM) [Y/n/?] (NEW) y fbsplash (26 kb) (FBSPLASH) [Y/n/?] (NEW) y flash_eraseall (5.9 kb) (FLASH_ERASEALL) [N/y/?] (NEW) n flash_lock (2.1 kb) (FLASH_LOCK) [N/y/?] (NEW) n flash_unlock (1.3 kb) (FLASH_UNLOCK) [N/y/?] (NEW) n flashcp (5.3 kb) (FLASHCP) [N/y/?] (NEW) n hdparm (25 kb) (HDPARM) [Y/n/?] (NEW) y Support obtaining detailed information directly from drives (FEATURE_HDPARM_GET_IDENTITY) [Y/n/?] (NEW) y Register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_SCAN_HWIF) [Y/n/?] (NEW) y Un-register an IDE interface (DANGEROUS) (FEATURE_HDPARM_HDIO_UNREGISTER_HWIF) [Y/n/?] (NEW) y Perform device reset (DANGEROUS) (FEATURE_HDPARM_HDIO_DRIVE_RESET) [Y/n/?] (NEW) y Tristate device for hotswap (DANGEROUS) (FEATURE_HDPARM_HDIO_TRISTATE_HWIF) [Y/n/?] (NEW) y Get/set using_dma flag (FEATURE_HDPARM_HDIO_GETSET_DMA) [Y/n/?] (NEW) y hexedit (21 kb) (HEXEDIT) [Y/n/?] (NEW) y i2cget (5.5 kb) (I2CGET) [Y/n/?] (NEW) y i2cset (6.7 kb) (I2CSET) [Y/n/?] (NEW) y i2cdump (7.1 kb) (I2CDUMP) [Y/n/?] (NEW) y i2cdetect (7.1 kb) (I2CDETECT) [Y/n/?] (NEW) y i2ctransfer (4.0 kb) (I2CTRANSFER) [Y/n/?] (NEW) y inotifyd (3.6 kb) (INOTIFYD) [N/y/?] (NEW) n less (16 kb) (LESS) [Y/n/?] (NEW) y Max number of input lines less will try to eat (FEATURE_LESS_MAXLINES) [9999999] (NEW) 9999999 Enable bracket searching (FEATURE_LESS_BRACKETS) [Y/n/?] (NEW) y Enable -m/-M (FEATURE_LESS_FLAGS) [Y/n/?] (NEW) y Enable -S (FEATURE_LESS_TRUNCATE) [Y/n/?] (NEW) y Enable marks (FEATURE_LESS_MARKS) [Y/n/?] (NEW) y Enable regular expressions (FEATURE_LESS_REGEXP) [Y/n/?] (NEW) y Enable automatic resizing on window size changes (FEATURE_LESS_WINCH) [Y/n/?] (NEW) y Use 'tell me cursor position' ESC sequence to measure window (FEATURE_LESS_ASK_TERMINAL) [Y/n/?] (NEW) y Enable flag changes ('-' command) (FEATURE_LESS_DASHCMD) [Y/n/?] (NEW) y Enable -N (dynamic switching of line numbers) (FEATURE_LESS_LINENUMS) [Y/n] (NEW) y Enable -R ('raw control characters') (FEATURE_LESS_RAW) [Y/n/?] (NEW) y Take options from $LESS environment variable (FEATURE_LESS_ENV) [Y/n/?] (NEW) y lsscsi (2.5 kb) (LSSCSI) [Y/n/?] (NEW) y makedevs (9.2 kb) (MAKEDEVS) [Y/n/?] (NEW) y Choose makedevs behaviour 1. leaf (FEATURE_MAKEDEVS_LEAF) (NEW) > 2. table (FEATURE_MAKEDEVS_TABLE) (NEW) choice[1-2]: 2 man (26 kb) (MAN) [Y/n/?] (NEW) y microcom (5.7 kb) (MICROCOM) [Y/n/?] (NEW) y mim (0.5 kb) (MIM) [Y/n/?] (NEW) y mt (2.5 kb) (MT) [Y/n/?] (NEW) y nandwrite (4.8 kb) (NANDWRITE) [Y/n/?] (NEW) y nanddump (5.2 kb) (NANDDUMP) [Y/n/?] (NEW) y partprobe (3.5 kb) (PARTPROBE) [Y/n/?] (NEW) y raidautorun (1.3 kb) (RAIDAUTORUN) [Y/n/?] (NEW) y readahead (1.5 kb) (READAHEAD) [Y/n/?] (NEW) y rfkill (4.4 kb) (RFKILL) [N/y/?] (NEW) n runlevel (559 bytes) (RUNLEVEL) [Y/n/?] (NEW) y rx (2.9 kb) (RX) [Y/n/?] (NEW) y setfattr (3.7 kb) (SETFATTR) [Y/n/?] (NEW) y setserial (6.9 kb) (SETSERIAL) [Y/n/?] (NEW) y strings (4.6 kb) (STRINGS) [Y/n/?] (NEW) y time (6.8 kb) (TIME) [Y/n/?] (NEW) y ts (450 bytes) (TS) [Y/n] (NEW) y ttysize (432 bytes) (TTYSIZE) [Y/n/?] (NEW) y ubiattach (4.2 kb) (UBIATTACH) [Y/n/?] (NEW) y ubidetach (4.1 kb) (UBIDETACH) [Y/n/?] (NEW) y ubimkvol (5.3 kb) (UBIMKVOL) [Y/n/?] (NEW) y ubirmvol (4.9 kb) (UBIRMVOL) [Y/n/?] (NEW) y ubirsvol (4.2 kb) (UBIRSVOL) [Y/n/?] (NEW) y ubiupdatevol (5.2 kb) (UBIUPDATEVOL) [Y/n/?] (NEW) y ubirename (2.4 kb) (UBIRENAME) [Y/n/?] (NEW) y volname (1.6 kb) (VOLNAME) [Y/n/?] (NEW) y watchdog (5.3 kb) (WATCHDOG) [Y/n/?] (NEW) y Open watchdog device twice, closing it gracefully in between (FEATURE_WATCHDOG_OPEN_TWICE) [N/y/?] (NEW) n * * Networking Utilities * Enable IPv6 support (FEATURE_IPV6) [Y/n/?] (NEW) y Enable Unix domain socket support (usually not needed) (FEATURE_UNIX_LOCAL) [N/y/?] (NEW) n Prefer IPv4 addresses from DNS queries (FEATURE_PREFER_IPV4_ADDRESS) [Y/n/?] (NEW) y Verbose resolution errors (VERBOSE_RESOLUTION_ERRORS) [N/y/?] (NEW) n Support /etc/networks (FEATURE_ETC_NETWORKS) [N/y/?] (NEW) n Consult /etc/services even for well-known ports (FEATURE_ETC_SERVICES) [N/y/?] (NEW) n Support infiniband HW (FEATURE_HWIB) [Y/n/?] (NEW) y In TLS code, support ciphers which use deprecated SHA1 (FEATURE_TLS_SHA1) [N/y/?] (NEW) n arp (10 kb) (ARP) [Y/n/?] (NEW) y arping (9 kb) (ARPING) [Y/n/?] (NEW) y brctl (4.7 kb) (BRCTL) [Y/n/?] (NEW) y Fancy options (FEATURE_BRCTL_FANCY) [Y/n/?] (NEW) y Support show (FEATURE_BRCTL_SHOW) [Y/n/?] (NEW) y dnsd (9.8 kb) (DNSD) [Y/n/?] (NEW) y ether-wake (4.9 kb) (ETHER_WAKE) [Y/n/?] (NEW) y ftpd (30 kb) (FTPD) [Y/n/?] (NEW) y Enable -w (upload commands) (FEATURE_FTPD_WRITE) [Y/n/?] (NEW) y Enable workaround for RFC-violating clients (FEATURE_FTPD_ACCEPT_BROKEN_LIST) [Y/n/?] (NEW) y Enable authentication (FEATURE_FTPD_AUTHENTICATION) [Y/n/?] (NEW) y ftpget (7.8 kb) (FTPGET) [Y/n/?] (NEW) y ftpput (7.5 kb) (FTPPUT) [Y/n/?] (NEW) y Enable long options in ftpget/ftpput (FEATURE_FTPGETPUT_LONG_OPTIONS) [Y/n] (NEW) y hostname (5.5 kb) (HOSTNAME) [Y/n/?] (NEW) y dnsdomainname (3.6 kb) (DNSDOMAINNAME) [Y/n/?] (NEW) y httpd (32 kb) (HTTPD) [Y/n/?] (NEW) y Default port (FEATURE_HTTPD_PORT_DEFAULT) [80] (NEW) 80 Support 'Ranges:' header (FEATURE_HTTPD_RANGES) [Y/n/?] (NEW) y Enable -u option (FEATURE_HTTPD_SETUID) [Y/n/?] (NEW) y Enable HTTP authentication (FEATURE_HTTPD_BASIC_AUTH) [Y/n/?] (NEW) y Support MD5-encrypted passwords in HTTP authentication (FEATURE_HTTPD_AUTH_MD5) [Y/n/?] (NEW) y Support Common Gateway Interface (CGI) (FEATURE_HTTPD_CGI) [Y/n/?] (NEW) y Support running scripts through an interpreter (FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR) [Y/n/?] (NEW) y Set REMOTE_PORT environment variable for CGI (FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV) [Y/n/?] (NEW) y Enable -e option (useful for CGIs written as shell scripts) (FEATURE_HTTPD_ENCODE_URL_STR) [Y/n/?] (NEW) y Support custom error pages (FEATURE_HTTPD_ERROR_PAGES) [Y/n/?] (NEW) y Support reverse proxy (FEATURE_HTTPD_PROXY) [Y/n/?] (NEW) y Support GZIP content encoding (FEATURE_HTTPD_GZIP) [Y/n/?] (NEW) y Support caching via ETag header (FEATURE_HTTPD_ETAG) [Y/n/?] (NEW) y Add Last-Modified header to response (FEATURE_HTTPD_LAST_MODIFIED) [Y/n/?] (NEW) y Add Date header to response (FEATURE_HTTPD_DATE) [Y/n/?] (NEW) y ACL IP (FEATURE_HTTPD_ACL_IP) [Y/n/?] (NEW) y ifconfig (12 kb) (IFCONFIG) [Y/n/?] (NEW) y Enable status reporting output (+7k) (FEATURE_IFCONFIG_STATUS) [Y/n/?] (NEW) y Enable slip-specific options "keepalive" and "outfill" (FEATURE_IFCONFIG_SLIP) [Y/n/?] (NEW) y Enable options "mem_start", "io_addr", and "irq" (FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ) [Y/n/?] (NEW) y Enable option "hw" (ether only) (FEATURE_IFCONFIG_HW) [Y/n/?] (NEW) y Set the broadcast automatically (FEATURE_IFCONFIG_BROADCAST_PLUS) [Y/n/?] (NEW) y ifenslave (13 kb) (IFENSLAVE) [Y/n/?] (NEW) y ifplugd (10 kb) (IFPLUGD) [Y/n/?] (NEW) y ifup (14 kb) (IFUP) [Y/n/?] (NEW) y ifdown (13 kb) (IFDOWN) [Y/n/?] (NEW) y Absolute path to ifstate file (IFUPDOWN_IFSTATE_PATH) [/var/run/ifstate] (NEW) /var/run/ifstate Use ip tool (else ifconfig/route is used) (FEATURE_IFUPDOWN_IP) [Y/n/?] (NEW) y Support IPv4 (FEATURE_IFUPDOWN_IPV4) [Y/n/?] (NEW) y Support IPv6 (FEATURE_IFUPDOWN_IPV6) [Y/n/?] (NEW) y Enable mapping support (FEATURE_IFUPDOWN_MAPPING) [Y/n/?] (NEW) y Support external DHCP clients (FEATURE_IFUPDOWN_EXTERNAL_DHCP) [N/y/?] (NEW) n inetd (18 kb) (INETD) [Y/n/?] (NEW) y Support echo service on port 7 (FEATURE_INETD_SUPPORT_BUILTIN_ECHO) [Y/n/?] (NEW) y Support discard service on port 8 (FEATURE_INETD_SUPPORT_BUILTIN_DISCARD) [Y/n/?] (NEW) y Support time service on port 37 (FEATURE_INETD_SUPPORT_BUILTIN_TIME) [Y/n/?] (NEW) y Support daytime service on port 13 (FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME) [Y/n/?] (NEW) y Support chargen service on port 19 (FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN) [Y/n/?] (NEW) y Support RPC services (FEATURE_INETD_RPC) [N/y/?] (NEW) n ip (35 kb) (IP) [Y/n/?] (NEW) y ipaddr (14 kb) (IPADDR) [Y/n/?] (NEW) y iplink (17 kb) (IPLINK) [Y/n/?] (NEW) y iproute (15 kb) (IPROUTE) [Y/n/?] (NEW) y iptunnel (9.6 kb) (IPTUNNEL) [Y/n/?] (NEW) y iprule (10 kb) (IPRULE) [Y/n/?] (NEW) y ipneigh (8.3 kb) (IPNEIGH) [Y/n/?] (NEW) y ip address (FEATURE_IP_ADDRESS) [Y/?] (NEW) y ip link (FEATURE_IP_LINK) [Y/?] (NEW) y ip route (FEATURE_IP_ROUTE) [Y/?] (NEW) y ip route configuration directory (FEATURE_IP_ROUTE_DIR) [/etc/iproute2] (NEW) /etc/iproute2 ip tunnel (FEATURE_IP_TUNNEL) [Y/?] (NEW) y ip rule (FEATURE_IP_RULE) [Y/?] (NEW) y ip neighbor (FEATURE_IP_NEIGH) [Y/?] (NEW) y Support displaying rarely used link types (FEATURE_IP_RARE_PROTOCOLS) [N/y/?] (NEW) n ipcalc (4.4 kb) (IPCALC) [Y/n/?] (NEW) y Enable long options (FEATURE_IPCALC_LONG_OPTIONS) [Y/n] (NEW) y Fancy IPCALC, more options, adds 1 kbyte (FEATURE_IPCALC_FANCY) [Y/n/?] (NEW) y fakeidentd (8.7 kb) (FAKEIDENTD) [Y/n/?] (NEW) y nameif (6.6 kb) (NAMEIF) [Y/n/?] (NEW) y Extended nameif (FEATURE_NAMEIF_EXTENDED) [Y/n/?] (NEW) y nbd-client (6 kb) (NBDCLIENT) [Y/n/?] (NEW) y nc (11 kb) (NC) [Y/n/?] (NEW) y netcat (11 kb) (NETCAT) [N/y/?] (NEW) n Netcat server options (-l) (NC_SERVER) [Y/n/?] (NEW) y Netcat extensions (-eiw and -f FILE) (NC_EXTRA) [Y/n/?] (NEW) y Netcat 1.10 compatibility (+2.5k) (NC_110_COMPAT) [Y/n/?] (NEW) y netstat (10 kb) (NETSTAT) [Y/n/?] (NEW) y Enable wide output (FEATURE_NETSTAT_WIDE) [Y/n/?] (NEW) y Enable PID/Program name output (FEATURE_NETSTAT_PRG) [Y/n/?] (NEW) y nslookup (9.7 kb) (NSLOOKUP) [Y/n/?] (NEW) y Use internal resolver code instead of libc (FEATURE_NSLOOKUP_BIG) [Y/n] (NEW) y Enable long options (FEATURE_NSLOOKUP_LONG_OPTIONS) [Y/n] (NEW) y ntpd (22 kb) (NTPD) [Y/n/?] (NEW) y Make ntpd usable as a NTP server (FEATURE_NTPD_SERVER) [Y/n/?] (NEW) y Make ntpd understand /etc/ntp.conf (FEATURE_NTPD_CONF) [Y/n/?] (NEW) y Support md5/sha1 message authentication codes (FEATURE_NTP_AUTH) [Y/n] (NEW) y ping (10 kb) (PING) [Y/n/?] (NEW) y ping6 (11 kb) (PING6) [Y/n/?] (NEW) y Enable fancy ping output (FEATURE_FANCY_PING) [Y/n/?] (NEW) y pscan (6 kb) (PSCAN) [Y/n/?] (NEW) y route (8.7 kb) (ROUTE) [Y/n/?] (NEW) y slattach (6.2 kb) (SLATTACH) [Y/n/?] (NEW) y ssl_client (25 kb) (SSL_CLIENT) [Y/n/?] (NEW) y tc (8.3 kb) (TC) [Y/n/?] (NEW) y Enable ingress (FEATURE_TC_INGRESS) [Y/n] (NEW) y tcpsvd (14 kb) (TCPSVD) [Y/n/?] (NEW) y udpsvd (13 kb) (UDPSVD) [Y/n/?] (NEW) y telnet (8.8 kb) (TELNET) [Y/n/?] (NEW) y Pass TERM type to remote host (FEATURE_TELNET_TTYPE) [Y/n/?] (NEW) y Pass USER type to remote host (FEATURE_TELNET_AUTOLOGIN) [Y/n/?] (NEW) y Enable window size autodetection (FEATURE_TELNET_WIDTH) [Y/n] (NEW) y telnetd (12 kb) (TELNETD) [Y/n/?] (NEW) y Support standalone telnetd (not inetd only) (FEATURE_TELNETD_STANDALONE) [Y/n/?] (NEW) y Default port (FEATURE_TELNETD_PORT_DEFAULT) [23] (NEW) 23 Support -w SEC option (inetd wait mode) (FEATURE_TELNETD_INETD_WAIT) [Y/n/?] (NEW) y tftp (11 kb) (TFTP) [Y/n/?] (NEW) y Enable progress bar (FEATURE_TFTP_PROGRESS_BAR) [Y/n] (NEW) y tftp-hpa compat (support -c get/put FILE) (FEATURE_TFTP_HPA_COMPAT) [Y/n] (NEW) y tftpd (10 kb) (TFTPD) [Y/n/?] (NEW) y Enable 'tftp get' and/or tftpd upload code (FEATURE_TFTP_GET) [Y/n/?] (NEW) y Enable 'tftp put' and/or tftpd download code (FEATURE_TFTP_PUT) [Y/n/?] (NEW) y Enable 'blksize' and 'tsize' protocol options (FEATURE_TFTP_BLOCKSIZE) [Y/n/?] (NEW) y Enable debug (TFTP_DEBUG) [N/y/?] (NEW) n traceroute (11 kb) (TRACEROUTE) [Y/n/?] (NEW) y traceroute6 (13 kb) (TRACEROUTE6) [Y/n/?] (NEW) y Enable verbose output (FEATURE_TRACEROUTE_VERBOSE) [Y/n/?] (NEW) y Enable -I option (use ICMP instead of UDP) (FEATURE_TRACEROUTE_USE_ICMP) [Y/n] (NEW) y tunctl (6.2 kb) (TUNCTL) [Y/n/?] (NEW) y Support owner:group assignment (FEATURE_TUNCTL_UG) [Y/n/?] (NEW) y vconfig (2.3 kb) (VCONFIG) [Y/n/?] (NEW) y wget (38 kb) (WGET) [Y/n/?] (NEW) y Enable long options (FEATURE_WGET_LONG_OPTIONS) [Y/n] (NEW) y Enable progress bar (+2k) (FEATURE_WGET_STATUSBAR) [Y/n] (NEW) y Enable FTP protocol (+1k) (FEATURE_WGET_FTP) [Y/n/?] (NEW) y Enable HTTP authentication (FEATURE_WGET_AUTHENTICATION) [Y/n/?] (NEW) y Enable timeout option -T SEC (FEATURE_WGET_TIMEOUT) [Y/n/?] (NEW) y Support HTTPS using internal TLS code (FEATURE_WGET_HTTPS) [Y/n/?] (NEW) y Try to connect to HTTPS using openssl (FEATURE_WGET_OPENSSL) [Y/n/?] (NEW) y whois (6.3 kb) (WHOIS) [Y/n/?] (NEW) y zcip (8.4 kb) (ZCIP) [Y/n/?] (NEW) y udhcpd (21 kb) (UDHCPD) [Y/n/?] (NEW) y Select IP address based on client MAC (FEATURE_UDHCPD_BASE_IP_ON_MAC) [N/y/?] (NEW) n Rewrite lease file at every new acknowledge (FEATURE_UDHCPD_WRITE_LEASES_EARLY) [Y/n/?] (NEW) y Absolute path to lease file (DHCPD_LEASES_FILE) [/var/lib/misc/udhcpd.leases] (NEW) /var/lib/misc/udhcpd.leases dumpleases (5.1 kb) (DUMPLEASES) [Y/n/?] (NEW) y dhcprelay (5.2 kb) (DHCPRELAY) [Y/n/?] (NEW) y udhcpc (24 kb) (UDHCPC) [Y/n/?] (NEW) y Verify that the offered address is free, using ARP ping (FEATURE_UDHCPC_ARPING) [Y/n/?] (NEW) y Do not pass malformed host and domain names (FEATURE_UDHCPC_SANITIZEOPT) [Y/n/?] (NEW) y Absolute path to config script (UDHCPC_DEFAULT_SCRIPT) [/usr/share/udhcpc/default.script] (NEW) /usr/share/udhcpc/default.script udhcpc6 (21 kb) (UDHCPC6) [Y/n/?] (NEW) y Support RFC 3646 (DNS server and search list) (FEATURE_UDHCPC6_RFC3646) [Y/n/?] (NEW) y Support RFC 4704 (Client FQDN) (FEATURE_UDHCPC6_RFC4704) [Y/n/?] (NEW) y Support RFC 4833 (Timezones) (FEATURE_UDHCPC6_RFC4833) [Y/n/?] (NEW) y Support RFC 5970 (Network Boot) (FEATURE_UDHCPC6_RFC5970) [Y/n/?] (NEW) y * * Common options for DHCP applets * Default interface name (UDHCPC_DEFAULT_INTERFACE) [eth0] (NEW) eth0 Enable '-P port' option for udhcpd and udhcpc (FEATURE_UDHCP_PORT) [N/y/?] (NEW) n Maximum verbosity level (0..9) (UDHCP_DEBUG) [2] (NEW) 2 DHCP options slack buffer size (UDHCPC_SLACK_FOR_BUGGY_SERVERS) [80] (NEW) 80 Support RFC 3397 domain search options (FEATURE_UDHCP_RFC3397) [Y/n/?] (NEW) y Support 802.1Q VLAN parameters options (FEATURE_UDHCP_8021Q) [Y/n/?] (NEW) y ifup udhcpc command line options (IFUPDOWN_UDHCPC_CMD_OPTIONS) [-R -n] (NEW) -R -n * * Print Utilities * lpd (5.5 kb) (LPD) [Y/n/?] (NEW) y lpr (9.9 kb) (LPR) [Y/n/?] (NEW) y lpq (9.9 kb) (LPQ) [Y/n/?] (NEW) y * * Mail Utilities * Default charset (FEATURE_MIME_CHARSET) [us-ascii] (NEW) us-ascii makemime (5.4 kb) (MAKEMIME) [Y/n/?] (NEW) y popmaildir (10 kb) (POPMAILDIR) [Y/n/?] (NEW) y Allow message filters and custom delivery program (FEATURE_POPMAILDIR_DELIVERY) [Y/n/?] (NEW) y reformime (7.5 kb) (REFORMIME) [Y/n/?] (NEW) y Accept and ignore options other than -x and -X (FEATURE_REFORMIME_COMPAT) [Y/n/?] (NEW) y sendmail (14 kb) (SENDMAIL) [Y/n/?] (NEW) y * * Process Utilities * Faster /proc scanning code (+100 bytes) (FEATURE_FAST_TOP) [N/y/?] (NEW) n Support thread display in ps/pstree/top (FEATURE_SHOW_THREADS) [Y/n/?] (NEW) y free (3.1 kb) (FREE) [Y/n/?] (NEW) y fuser (7 kb) (FUSER) [Y/n/?] (NEW) y iostat (7.6 kb) (IOSTAT) [Y/n/?] (NEW) y kill (3.1 kb) (KILL) [Y/n/?] (NEW) y killall (5.6 kb) (KILLALL) [Y/n/?] (NEW) y killall5 (5.3 kb) (KILLALL5) [Y/n/?] (NEW) y lsof (3.4 kb) (LSOF) [Y/n/?] (NEW) y mpstat (9.8 kb) (MPSTAT) [Y/n/?] (NEW) y nmeter (11 kb) (NMETER) [Y/n/?] (NEW) y pgrep (6.5 kb) (PGREP) [Y/n/?] (NEW) y pkill (7.5 kb) (PKILL) [Y/n/?] (NEW) y pidof (6.3 kb) (PIDOF) [Y/n/?] (NEW) y Enable single shot (-s) (FEATURE_PIDOF_SINGLE) [Y/n/?] (NEW) y Enable omitting pids (-o PID) (FEATURE_PIDOF_OMIT) [Y/n/?] (NEW) y pmap (6 kb) (PMAP) [Y/n/?] (NEW) y powertop (9.6 kb) (POWERTOP) [Y/n/?] (NEW) y Accept keyboard commands (FEATURE_POWERTOP_INTERACTIVE) [Y/n/?] (NEW) y ps (11 kb) (PS) [Y/n/?] (NEW) y Enable -o time and -o etime specifiers (FEATURE_PS_TIME) [Y/n] (NEW) y Support Linux prior to 2.4.0 and non-ELF systems (FEATURE_PS_UNUSUAL_SYSTEMS) [N/y/?] (NEW) n Enable -o rgroup, -o ruser, -o nice specifiers (FEATURE_PS_ADDITIONAL_COLUMNS) [Y/n] (NEW) y pstree (9.3 kb) (PSTREE) [Y/n/?] (NEW) y pwdx (3.7 kb) (PWDX) [Y/n/?] (NEW) y smemcap (2.5 kb) (SMEMCAP) [Y/n/?] (NEW) y sysctl (7.4 kb) (BB_SYSCTL) [Y/n/?] (NEW) y top (18 kb) (TOP) [Y/n/?] (NEW) y Accept keyboard commands (FEATURE_TOP_INTERACTIVE) [Y/n/?] (NEW) y Show CPU per-process usage percentage (FEATURE_TOP_CPU_USAGE_PERCENTAGE) [Y/n/?] (NEW) y Show CPU global usage percentage (FEATURE_TOP_CPU_GLOBAL_PERCENTS) [Y/n/?] (NEW) y SMP CPU usage display ('c' key) (FEATURE_TOP_SMP_CPU) [Y/n/?] (NEW) y Show 1/10th of a percent in CPU/mem statistics (FEATURE_TOP_DECIMALS) [Y/n/?] (NEW) y Show CPU process runs on ('j' field) (FEATURE_TOP_SMP_PROCESS) [Y/n/?] (NEW) y Topmem command ('s' key) (FEATURE_TOPMEM) [Y/n/?] (NEW) y uptime (3.7 kb) (UPTIME) [Y/n/?] (NEW) y Show the number of users (FEATURE_UPTIME_UTMP_SUPPORT) [Y/n/?] (NEW) y watch (4.4 kb) (WATCH) [Y/n/?] (NEW) y * * Runit Utilities * chpst (9 kb) (CHPST) [Y/n/?] (NEW) y setuidgid (4 kb) (SETUIDGID) [Y/n/?] (NEW) y envuidgid (3.9 kb) (ENVUIDGID) [Y/n/?] (NEW) y envdir (2.5 kb) (ENVDIR) [Y/n/?] (NEW) y softlimit (4.5 kb) (SOFTLIMIT) [Y/n/?] (NEW) y runsv (7.8 kb) (RUNSV) [Y/n/?] (NEW) y runsvdir (6.3 kb) (RUNSVDIR) [Y/n/?] (NEW) y Enable scrolling argument log (FEATURE_RUNSVDIR_LOG) [N/y/?] (NEW) n sv (8.5 kb) (SV) [Y/n/?] (NEW) y Default directory for services (SV_DEFAULT_SERVICE_DIR) [/var/service] (NEW) /var/service svc (8.4 kb) (SVC) [Y/n/?] (NEW) y svok (1.5 kb) (SVOK) [Y/n/?] (NEW) y svlogd (16 kb) (SVLOGD) [Y/n/?] (NEW) y * * Shells * Choose which shell is aliased to 'sh' name > 1. ash (SH_IS_ASH) (NEW) 2. hush (SH_IS_HUSH) (NEW) 3. none (SH_IS_NONE) (NEW) choice[1-3?]: 1 Choose which shell is aliased to 'bash' name 1. ash (BASH_IS_ASH) (NEW) 2. hush (BASH_IS_HUSH) (NEW) > 3. none (BASH_IS_NONE) (NEW) choice[1-3?]: 3 ash (78 kb) (ASH) [Y/n/?] (NEW) y Optimize for size instead of speed (ASH_OPTIMIZE_FOR_SIZE) [Y/n] (NEW) y Use internal glob() implementation (ASH_INTERNAL_GLOB) [Y/n/?] (NEW) y bash-compatible extensions (ASH_BASH_COMPAT) [Y/n] (NEW) y 'source' and '.' builtins search current directory after $PATH (ASH_BASH_SOURCE_CURDIR) [N/y/?] (NEW) n command_not_found_handle hook support (ASH_BASH_NOT_FOUND_HOOK) [Y/n/?] (NEW) y Job control (ASH_JOB_CONTROL) [Y/n] (NEW) y Alias support (ASH_ALIAS) [Y/n] (NEW) y Pseudorandom generator and $RANDOM variable (ASH_RANDOM_SUPPORT) [Y/n/?] (NEW) y Expand prompt string (ASH_EXPAND_PRMT) [Y/n/?] (NEW) y Idle timeout variable $TMOUT (ASH_IDLE_TIMEOUT) [Y/n/?] (NEW) y Check for new mail in interactive shell (ASH_MAIL) [Y/n/?] (NEW) y echo builtin (ASH_ECHO) [Y/n] (NEW) y printf builtin (ASH_PRINTF) [Y/n] (NEW) y test builtin (ASH_TEST) [Y/n] (NEW) y help builtin (ASH_HELP) [Y/n] (NEW) y getopts builtin (ASH_GETOPTS) [Y/n] (NEW) y command builtin (ASH_CMDCMD) [Y/n/?] (NEW) y cttyhack (2.4 kb) (CTTYHACK) [Y/n/?] (NEW) y hush (68 kb) (HUSH) [Y/n/?] (NEW) y Internal shell for embedded script support (SHELL_HUSH) [Y] (NEW) y bash-compatible extensions (HUSH_BASH_COMPAT) [Y/n] (NEW) y Brace expansion (HUSH_BRACE_EXPANSION) [Y/n/?] (NEW) y 'source' and '.' builtins search current directory after $PATH (HUSH_BASH_SOURCE_CURDIR) [N/y/?] (NEW) n $LINENO variable (bashism) (HUSH_LINENO_VAR) [Y/n] (NEW) y Interactive mode (HUSH_INTERACTIVE) [Y/n/?] (NEW) y Save command history to .hush_history (HUSH_SAVEHISTORY) [Y/n] (NEW) y Job control (HUSH_JOB) [Y/n/?] (NEW) y Support command substitution (HUSH_TICK) [Y/n/?] (NEW) y Support if/then/elif/else/fi (HUSH_IF) [Y/n] (NEW) y Support for, while and until loops (HUSH_LOOPS) [Y/n] (NEW) y Support case ... esac statement (HUSH_CASE) [Y/n/?] (NEW) y Support funcname() { commands; } syntax (HUSH_FUNCTIONS) [Y/n/?] (NEW) y local builtin (HUSH_LOCAL) [Y/n/?] (NEW) y Pseudorandom generator and $RANDOM variable (HUSH_RANDOM_SUPPORT) [Y/n/?] (NEW) y Support 'hush -x' option and 'set -x' command (HUSH_MODE_X) [Y/n/?] (NEW) y echo builtin (HUSH_ECHO) [Y/n] (NEW) y printf builtin (HUSH_PRINTF) [Y/n] (NEW) y test builtin (HUSH_TEST) [Y/n] (NEW) y help builtin (HUSH_HELP) [Y/n] (NEW) y export builtin (HUSH_EXPORT) [Y/n] (NEW) y Support 'export -n' option (HUSH_EXPORT_N) [Y/n/?] (NEW) y readonly builtin (HUSH_READONLY) [Y/n/?] (NEW) y kill builtin (supports kill %jobspec) (HUSH_KILL) [Y/n] (NEW) y wait builtin (HUSH_WAIT) [Y/n] (NEW) y command builtin (HUSH_COMMAND) [Y/n] (NEW) y trap builtin (HUSH_TRAP) [Y/n] (NEW) y type builtin (HUSH_TYPE) [Y/n] (NEW) y times builtin (HUSH_TIMES) [Y/n] (NEW) y read builtin (HUSH_READ) [Y/n] (NEW) y set builtin (HUSH_SET) [Y/n] (NEW) y unset builtin (HUSH_UNSET) [Y/n] (NEW) y ulimit builtin (HUSH_ULIMIT) [Y/n] (NEW) y umask builtin (HUSH_UMASK) [Y/n] (NEW) y getopts builtin (HUSH_GETOPTS) [Y/n] (NEW) y memleak builtin (debugging) (HUSH_MEMLEAK) [N/y] (NEW) n * * Options common to all shells * POSIX math support (FEATURE_SH_MATH) [Y/n/?] (NEW) y Extend POSIX math support to 64 bit (FEATURE_SH_MATH_64) [Y/n/?] (NEW) y Support BASE#nnnn literals (FEATURE_SH_MATH_BASE) [Y/n] (NEW) y Hide message on interactive shell startup (FEATURE_SH_EXTRA_QUIET) [Y/n/?] (NEW) y Standalone shell (FEATURE_SH_STANDALONE) [N/y/?] (NEW) n Run 'nofork' applets directly (FEATURE_SH_NOFORK) [N/y/?] (NEW) n read -t N.NNN support (+110 bytes) (FEATURE_SH_READ_FRAC) [Y/n/?] (NEW) y Use $HISTFILESIZE (FEATURE_SH_HISTFILESIZE) [Y/n/?] (NEW) y Embed scripts in the binary (FEATURE_SH_EMBEDDED_SCRIPTS) [Y/n/?] (NEW) y * * System Logging Utilities * klogd (5.7 kb) (KLOGD) [Y/n/?] (NEW) y * * klogd should not be used together with syslog to kernel printk buffer * Use the klogctl() interface (FEATURE_KLOGD_KLOGCTL) [Y/n/?] (NEW) y logger (6.3 kb) (LOGGER) [Y/n/?] (NEW) y logread (4.8 kb) (LOGREAD) [Y/n/?] (NEW) y Double buffering (FEATURE_LOGREAD_REDUCED_LOCKING) [Y/n/?] (NEW) y syslogd (13 kb) (SYSLOGD) [Y/n/?] (NEW) y Rotate message files (FEATURE_ROTATE_LOGFILE) [Y/n/?] (NEW) y Remote Log support (FEATURE_REMOTE_LOG) [Y/n/?] (NEW) y Support -D (drop dups) option (FEATURE_SYSLOGD_DUP) [Y/n/?] (NEW) y Support syslog.conf (FEATURE_SYSLOGD_CFG) [Y/n/?] (NEW) y Include milliseconds in timestamps (FEATURE_SYSLOGD_PRECISE_TIMESTAMPS) [N/y/?] (NEW) n Read buffer size in bytes (FEATURE_SYSLOGD_READ_BUFFER_SIZE) [256] (NEW) 256 Circular Buffer support (FEATURE_IPC_SYSLOG) [Y/n/?] (NEW) y Circular buffer size in Kbytes (minimum 4KB) (FEATURE_IPC_SYSLOG_BUFFER_SIZE) [16] (NEW) 16 Linux kernel printk buffer support (FEATURE_KMSG_SYSLOG) [Y/n/?] (NEW) y make -C /home/build/oil/_build/deps-source/busybox/busybox-1.35.0 O=/home/build/oil/_build/wedge/tmp/busybox-1.35.0 Using /home/build/oil/_build/deps-source/busybox/busybox-1.35.0 as source for busybox GEN /home/build/oil/_build/wedge/tmp/busybox-1.35.0/Makefile SPLIT include/autoconf.h -> include/config/* GEN include/bbconfigopts.h GEN include/common_bufsiz.h GEN include/embedded_scripts.h HOSTCC applets/usage GEN include/usage_compressed.h HOSTCC applets/applet_tables GEN include/applet_tables.h include/NUM_APPLETS.h GEN include/applet_tables.h include/NUM_APPLETS.h CC applets/applets.o LD applets/built-in.o HOSTCC applets/usage_pod LD archival/built-in.o CC archival/bbunzip.o CC archival/bzip2.o CC archival/chksum_and_xwrite_tar_header.o CC archival/cpio.o CC archival/dpkg.o CC archival/dpkg_deb.o CC archival/gzip.o CC archival/lzop.o CC archival/rpm.o CC archival/tar.o CC archival/unzip.o AR archival/lib.a LD archival/libarchive/built-in.o CC archival/libarchive/common.o CC archival/libarchive/data_align.o CC archival/libarchive/data_extract_all.o CC archival/libarchive/data_extract_to_command.o CC archival/libarchive/data_extract_to_stdout.o CC archival/libarchive/data_skip.o CC archival/libarchive/decompress_bunzip2.o CC archival/libarchive/decompress_gunzip.o CC archival/libarchive/decompress_unlzma.o CC archival/libarchive/decompress_unxz.o CC archival/libarchive/filter_accept_all.o CC archival/libarchive/filter_accept_list.o CC archival/libarchive/filter_accept_list_reassign.o CC archival/libarchive/filter_accept_reject_list.o CC archival/libarchive/find_list_entry.o CC archival/libarchive/get_header_ar.o CC archival/libarchive/get_header_cpio.o CC archival/libarchive/get_header_tar.o CC archival/libarchive/get_header_tar_bz2.o CC archival/libarchive/get_header_tar_gz.o CC archival/libarchive/get_header_tar_lzma.o CC archival/libarchive/get_header_tar_xz.o CC archival/libarchive/header_list.o CC archival/libarchive/header_skip.o CC archival/libarchive/header_verbose_list.o CC archival/libarchive/init_handle.o CC archival/libarchive/lzo1x_1.o CC archival/libarchive/lzo1x_1o.o CC archival/libarchive/lzo1x_d.o CC archival/libarchive/open_transformer.o CC archival/libarchive/seek_by_jump.o CC archival/libarchive/seek_by_read.o CC archival/libarchive/unpack_ar_archive.o CC archival/libarchive/unsafe_prefix.o CC archival/libarchive/unsafe_symlink_target.o AR archival/libarchive/lib.a LD console-tools/built-in.o CC console-tools/chvt.o CC console-tools/clear.o CC console-tools/deallocvt.o CC console-tools/dumpkmap.o CC console-tools/fgconsole.o CC console-tools/kbd_mode.o CC console-tools/loadfont.o CC console-tools/loadkmap.o CC console-tools/openvt.o CC console-tools/reset.o CC console-tools/resize.o CC console-tools/setconsole.o CC console-tools/setkeycodes.o CC console-tools/setlogcons.o CC console-tools/showkey.o AR console-tools/lib.a LD coreutils/built-in.o CC coreutils/basename.o CC coreutils/cat.o CC coreutils/chgrp.o CC coreutils/chmod.o CC coreutils/chown.o CC coreutils/chroot.o CC coreutils/cksum.o CC coreutils/comm.o CC coreutils/cp.o CC coreutils/cut.o CC coreutils/date.o CC coreutils/dd.o CC coreutils/df.o CC coreutils/dirname.o CC coreutils/dos2unix.o CC coreutils/du.o CC coreutils/echo.o CC coreutils/env.o CC coreutils/expand.o CC coreutils/expr.o CC coreutils/factor.o CC coreutils/false.o CC coreutils/fold.o CC coreutils/head.o CC coreutils/hostid.o CC coreutils/id.o CC coreutils/install.o CC coreutils/link.o CC coreutils/ln.o CC coreutils/logname.o CC coreutils/ls.o CC coreutils/md5_sha1_sum.o CC coreutils/mkdir.o CC coreutils/mkfifo.o CC coreutils/mknod.o CC coreutils/mktemp.o CC coreutils/mv.o CC coreutils/nice.o CC coreutils/nl.o CC coreutils/nohup.o CC coreutils/nproc.o CC coreutils/od.o CC coreutils/paste.o CC coreutils/printenv.o CC coreutils/printf.o CC coreutils/pwd.o CC coreutils/readlink.o CC coreutils/realpath.o CC coreutils/rm.o CC coreutils/rmdir.o CC coreutils/seq.o CC coreutils/shred.o CC coreutils/shuf.o CC coreutils/sleep.o CC coreutils/sort.o CC coreutils/split.o CC coreutils/stat.o CC coreutils/stty.o CC coreutils/sum.o CC coreutils/sync.o CC coreutils/tac.o CC coreutils/tail.o CC coreutils/tee.o CC coreutils/test.o CC coreutils/test_ptr_hack.o CC coreutils/timeout.o CC coreutils/touch.o CC coreutils/tr.o CC coreutils/true.o CC coreutils/truncate.o CC coreutils/tty.o CC coreutils/uname.o CC coreutils/uniq.o CC coreutils/unlink.o CC coreutils/usleep.o CC coreutils/uudecode.o CC coreutils/uuencode.o CC coreutils/wc.o CC coreutils/who.o CC coreutils/whoami.o CC coreutils/yes.o AR coreutils/lib.a LD coreutils/libcoreutils/built-in.o CC coreutils/libcoreutils/cp_mv_stat.o CC coreutils/libcoreutils/getopt_mk_fifo_nod.o AR coreutils/libcoreutils/lib.a LD debianutils/built-in.o CC debianutils/pipe_progress.o CC debianutils/run_parts.o CC debianutils/start_stop_daemon.o CC debianutils/which.o AR debianutils/lib.a LD klibc-utils/built-in.o CC klibc-utils/resume.o AR klibc-utils/lib.a LD e2fsprogs/built-in.o CC e2fsprogs/chattr.o CC e2fsprogs/e2fs_lib.o CC e2fsprogs/fsck.o CC e2fsprogs/lsattr.o AR e2fsprogs/lib.a LD editors/built-in.o CC editors/awk.o CC editors/cmp.o CC editors/diff.o CC editors/ed.o CC editors/patch.o CC editors/sed.o CC editors/vi.o AR editors/lib.a LD findutils/built-in.o CC findutils/find.o CC findutils/grep.o CC findutils/xargs.o AR findutils/lib.a LD init/built-in.o CC init/bootchartd.o CC init/halt.o CC init/init.o AR init/lib.a LD libbb/built-in.o CC libbb/appletlib.o CC libbb/ask_confirmation.o CC libbb/auto_string.o CC libbb/bb_askpass.o CC libbb/bb_bswap_64.o CC libbb/bb_cat.o CC libbb/bb_do_delay.o CC libbb/bb_getgroups.o CC libbb/bb_getsockname.o CC libbb/bb_pwd.o CC libbb/bb_qsort.o CC libbb/bb_strtonum.o CC libbb/capability.o CC libbb/change_identity.o CC libbb/chomp.o CC libbb/common_bufsiz.o CC libbb/compare_string_array.o CC libbb/concat_path_file.o CC libbb/concat_subpath_file.o CC libbb/const_hack.o CC libbb/copy_file.o CC libbb/copyfd.o CC libbb/correct_password.o CC libbb/crc32.o CC libbb/default_error_retval.o CC libbb/device_open.o CC libbb/dump.o CC libbb/duration.o CC libbb/endofname.o CC libbb/executable.o CC libbb/fclose_nonstdin.o CC libbb/fflush_stdout_and_exit.o CC libbb/fgets_str.o CC libbb/find_mount_point.o CC libbb/find_pid_by_name.o CC libbb/find_root_device.o CC libbb/full_write.o CC libbb/get_console.o CC libbb/get_cpu_count.o CC libbb/get_last_path_component.o CC libbb/get_line_from_file.o CC libbb/get_shell_name.o CC libbb/get_volsize.o CC libbb/getopt32.o CC libbb/getopt_allopts.o CC libbb/getpty.o CC libbb/hash_md5_sha.o CC libbb/herror_msg.o CC libbb/human_readable.o CC libbb/in_ether.o CC libbb/inet_cksum.o CC libbb/inet_common.o CC libbb/inode_hash.o CC libbb/isdirectory.o CC libbb/isqrt.o CC libbb/iterate_on_dir.o CC libbb/kernel_version.o CC libbb/last_char_is.o CC libbb/lineedit.o CC libbb/lineedit_ptr_hack.o CC libbb/llist.o CC libbb/logenv.o CC libbb/login.o CC libbb/loop.o CC libbb/make_directory.o CC libbb/makedev.o CC libbb/match_fstype.o CC libbb/messages.o CC libbb/missing_syscalls.o CC libbb/mode_string.o CC libbb/nuke_str.o CC libbb/obscure.o CC libbb/parse_config.o CC libbb/parse_mode.o CC libbb/percent_decode.o CC libbb/perror_msg.o CC libbb/perror_nomsg.o CC libbb/perror_nomsg_and_die.o CC libbb/pidfile.o CC libbb/platform.o CC libbb/print_flags.o CC libbb/print_numbered_lines.o CC libbb/printable.o CC libbb/printable_string.o CC libbb/process_escape_sequence.o CC libbb/procps.o CC libbb/progress.o CC libbb/ptr_to_globals.o CC libbb/pw_encrypt.o CC libbb/read.o CC libbb/read_key.o CC libbb/read_printf.o CC libbb/recursive_action.o CC libbb/remove_file.o CC libbb/replace.o CC libbb/rtc.o CC libbb/run_shell.o CC libbb/safe_gethostname.o CC libbb/safe_poll.o CC libbb/safe_strncpy.o CC libbb/safe_write.o CC libbb/securetty.o CC libbb/setup_environment.o CC libbb/signals.o CC libbb/simplify_path.o CC libbb/single_argv.o CC libbb/skip_whitespace.o CC libbb/speed_table.o CC libbb/str_tolower.o CC libbb/strrstr.o CC libbb/sysconf.o CC libbb/time.o CC libbb/trim.o CC libbb/u_signal_names.o CC libbb/ubi.o CC libbb/udp_io.o CC libbb/unicode.o CC libbb/update_passwd.o CC libbb/utmp.o CC libbb/uuencode.o CC libbb/verror_msg.o CC libbb/vfork_daemon_rexec.o CC libbb/warn_ignoring_args.o CC libbb/wfopen.o CC libbb/wfopen_input.o CC libbb/write.o CC libbb/xatonum.o CC libbb/xconnect.o CC libbb/xfunc_die.o CC libbb/xfuncs.o CC libbb/xfuncs_printf.o CC libbb/xgetcwd.o CC libbb/xgethostbyname.o CC libbb/xreadlink.o CC libbb/xrealloc_vector.o CC libbb/xregcomp.o AR libbb/lib.a LD libpwdgrp/built-in.o CC libpwdgrp/pwd_grp.o CC libpwdgrp/uidgid_get.o AR libpwdgrp/lib.a LD loginutils/built-in.o CC loginutils/add-remove-shell.o CC loginutils/addgroup.o CC loginutils/adduser.o CC loginutils/chpasswd.o CC loginutils/cryptpw.o CC loginutils/deluser.o CC loginutils/getty.o CC loginutils/login.o CC loginutils/passwd.o CC loginutils/su.o CC loginutils/sulogin.o CC loginutils/vlock.o AR loginutils/lib.a LD mailutils/built-in.o CC mailutils/mail.o CC mailutils/makemime.o CC mailutils/popmaildir.o CC mailutils/reformime.o CC mailutils/sendmail.o AR mailutils/lib.a LD miscutils/built-in.o CC miscutils/adjtimex.o CC miscutils/ascii.o CC miscutils/bc.o CC miscutils/beep.o CC miscutils/chat.o CC miscutils/conspy.o CC miscutils/crond.o CC miscutils/crontab.o CC miscutils/devmem.o CC miscutils/fbsplash.o CC miscutils/hdparm.o CC miscutils/hexedit.o CC miscutils/i2c_tools.o /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c: In function ‘list_i2c_busses_and_exit’: /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1150:46: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] 1150 | snprintf(path, NAME_MAX, "%s/%s/name", | ^~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1150:17: note: ‘snprintf’ output between 25 and 280 bytes into a destination of size 255 1150 | snprintf(path, NAME_MAX, "%s/%s/name", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1151 | i2cdev_path, de->d_name); | ~~~~~~~~~~~~~~~~~~~~~~~~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1155:38: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] 1155 | "%s/%s/device/name", | ^~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1154:25: note: ‘snprintf’ output between 32 and 287 bytes into a destination of size 255 1154 | snprintf(path, NAME_MAX, | ^~~~~~~~~~~~~~~~~~~~~~~~ 1155 | "%s/%s/device/name", | ~~~~~~~~~~~~~~~~~~~~ 1156 | i2cdev_path, de->d_name); | ~~~~~~~~~~~~~~~~~~~~~~~~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1163:38: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] 1163 | "%s/%s/device/name", | ^~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1162:25: note: ‘snprintf’ output between 32 and 287 bytes into a destination of size 255 1162 | snprintf(path, NAME_MAX, | ^~~~~~~~~~~~~~~~~~~~~~~~ 1163 | "%s/%s/device/name", | ~~~~~~~~~~~~~~~~~~~~ 1164 | i2cdev_path, de->d_name); | ~~~~~~~~~~~~~~~~~~~~~~~~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1175:54: warning: ‘%s’ directive output may be truncated writing up to 255 bytes into a region of size 236 [-Wformat-truncation=] 1175 | "%s/%s/device/%s/name", | ^~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/miscutils/i2c_tools.c:1174:41: note: ‘snprintf’ output between 33 and 543 bytes into a destination of size 255 1174 | snprintf(path, NAME_MAX, | ^~~~~~~~~~~~~~~~~~~~~~~~ 1175 | "%s/%s/device/%s/name", | ~~~~~~~~~~~~~~~~~~~~~~~ 1176 | i2cdev_path, de->d_name, | ~~~~~~~~~~~~~~~~~~~~~~~~ 1177 | subde->d_name); | ~~~~~~~~~~~~~~ CC miscutils/less.o CC miscutils/lsscsi.o CC miscutils/makedevs.o CC miscutils/man.o CC miscutils/microcom.o CC miscutils/mt.o CC miscutils/nandwrite.o CC miscutils/partprobe.o CC miscutils/raidautorun.o CC miscutils/readahead.o CC miscutils/runlevel.o CC miscutils/rx.o CC miscutils/setfattr.o CC miscutils/setserial.o CC miscutils/strings.o CC miscutils/time.o CC miscutils/ts.o CC miscutils/ttysize.o CC miscutils/ubi_tools.o CC miscutils/ubirename.o CC miscutils/volname.o CC miscutils/watchdog.o AR miscutils/lib.a LD modutils/built-in.o CC modutils/modinfo.o CC modutils/modprobe-small.o CC modutils/modutils.o /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/modutils/modutils.c: In function ‘filename2modname’: /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/modutils/modutils.c:115:1: warning: function may return address of local variable [-Wreturn-local-addr] 115 | } | ^ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/modutils/modutils.c:94:14: note: declared here 94 | char local_modname[MODULE_NAME_LEN]; | ^~~~~~~~~~~~~ AR modutils/lib.a LD networking/built-in.o CC networking/arp.o CC networking/arping.o CC networking/brctl.o CC networking/dnsd.o CC networking/ether-wake.o CC networking/ftpd.o CC networking/ftpgetput.o CC networking/hostname.o CC networking/httpd.o CC networking/ifconfig.o CC networking/ifenslave.o CC networking/ifplugd.o CC networking/ifupdown.o CC networking/inetd.o CC networking/interface.o CC networking/ip.o CC networking/ipcalc.o CC networking/isrv.o CC networking/isrv_identd.o CC networking/nameif.o CC networking/nbd-client.o CC networking/nc.o CC networking/netstat.o CC networking/nslookup.o CC networking/ntpd.o CC networking/parse_pasv_epsv.o CC networking/ping.o CC networking/pscan.o CC networking/route.o CC networking/slattach.o CC networking/ssl_client.o CC networking/tc.o CC networking/tcpudp.o CC networking/tcpudp_perhost.o CC networking/telnet.o CC networking/telnetd.o CC networking/tftp.o CC networking/tls.o CC networking/tls_aes.o CC networking/tls_aesgcm.o CC networking/tls_fe.o CC networking/tls_pstm.o CC networking/tls_pstm_montgomery_reduce.o CC networking/tls_pstm_mul_comba.o CC networking/tls_pstm_sqr_comba.o CC networking/tls_rsa.o CC networking/tls_sp_c32.o CC networking/traceroute.o CC networking/tunctl.o CC networking/vconfig.o CC networking/wget.o CC networking/whois.o CC networking/zcip.o AR networking/lib.a LD networking/libiproute/built-in.o CC networking/libiproute/ip_parse_common_args.o CC networking/libiproute/ipaddress.o CC networking/libiproute/iplink.o CC networking/libiproute/ipneigh.o CC networking/libiproute/iproute.o CC networking/libiproute/iprule.o CC networking/libiproute/iptunnel.o CC networking/libiproute/libnetlink.o CC networking/libiproute/ll_addr.o CC networking/libiproute/ll_map.o CC networking/libiproute/ll_proto.o CC networking/libiproute/ll_types.o CC networking/libiproute/rt_names.o CC networking/libiproute/rtm_map.o CC networking/libiproute/utils.o AR networking/libiproute/lib.a LD networking/udhcp/built-in.o CC networking/udhcp/arpping.o CC networking/udhcp/common.o CC networking/udhcp/d6_dhcpc.o CC networking/udhcp/d6_packet.o CC networking/udhcp/d6_socket.o CC networking/udhcp/dhcpc.o CC networking/udhcp/dhcpd.o CC networking/udhcp/dhcprelay.o CC networking/udhcp/domain_codec.o CC networking/udhcp/dumpleases.o CC networking/udhcp/packet.o CC networking/udhcp/signalpipe.o CC networking/udhcp/socket.o AR networking/udhcp/lib.a LD printutils/built-in.o CC printutils/lpd.o CC printutils/lpr.o AR printutils/lib.a LD procps/built-in.o CC procps/free.o CC procps/fuser.o CC procps/iostat.o CC procps/kill.o CC procps/lsof.o CC procps/mpstat.o CC procps/nmeter.o CC procps/pgrep.o CC procps/pidof.o CC procps/pmap.o CC procps/powertop.o /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/procps/powertop.c: In function ‘read_cstate_counts’: /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/procps/powertop.c:181:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 171 [-Wformat-overflow=] 181 | sprintf(buf, "%s/%s/power", "/proc/acpi/processor", d->d_name); | ^~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/procps/powertop.c:181:17: note: ‘sprintf’ output between 28 and 283 bytes into a destination of size 192 181 | sprintf(buf, "%s/%s/power", "/proc/acpi/processor", d->d_name); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC procps/ps.o CC procps/pstree.o CC procps/pwdx.o CC procps/smemcap.o CC procps/sysctl.o CC procps/top.o CC procps/uptime.o CC procps/watch.o AR procps/lib.a LD runit/built-in.o CC runit/chpst.o CC runit/runsv.o CC runit/runsvdir.o CC runit/sv.o CC runit/svlogd.o AR runit/lib.a LD selinux/built-in.o AR selinux/lib.a LD shell/built-in.o CC shell/ash.o CC shell/ash_ptr_hack.o CC shell/cttyhack.o CC shell/hush.o CC shell/match.o CC shell/math.o CC shell/random.o CC shell/shell_common.o AR shell/lib.a LD sysklogd/built-in.o CC sysklogd/klogd.o CC sysklogd/logread.o CC sysklogd/syslogd_and_logger.o AR sysklogd/lib.a LD util-linux/built-in.o CC util-linux/acpid.o CC util-linux/blkdiscard.o CC util-linux/blkid.o CC util-linux/blockdev.o CC util-linux/cal.o CC util-linux/chrt.o CC util-linux/dmesg.o CC util-linux/eject.o CC util-linux/fallocate.o CC util-linux/fatattr.o CC util-linux/fbset.o CC util-linux/fdformat.o CC util-linux/fdisk.o CC util-linux/findfs.o CC util-linux/flock.o CC util-linux/freeramdisk.o CC util-linux/fsck_minix.o CC util-linux/fsfreeze.o CC util-linux/fstrim.o CC util-linux/getopt.o CC util-linux/hexdump.o CC util-linux/hexdump_xxd.o CC util-linux/hwclock.o CC util-linux/ionice.o CC util-linux/ipcrm.o CC util-linux/ipcs.o CC util-linux/last_fancy.o CC util-linux/losetup.o CC util-linux/lspci.o CC util-linux/lsusb.o CC util-linux/mdev.o CC util-linux/mesg.o CC util-linux/mkfs_ext2.o CC util-linux/mkfs_minix.o CC util-linux/mkfs_vfat.o CC util-linux/mkswap.o CC util-linux/more.o CC util-linux/mount.o CC util-linux/mountpoint.o CC util-linux/nsenter.o CC util-linux/pivot_root.o CC util-linux/rdate.o CC util-linux/rdev.o CC util-linux/readprofile.o CC util-linux/renice.o CC util-linux/rev.o CC util-linux/rtcwake.o CC util-linux/script.o CC util-linux/scriptreplay.o CC util-linux/setarch.o CC util-linux/setpriv.o CC util-linux/setsid.o CC util-linux/swaponoff.o CC util-linux/switch_root.o CC util-linux/taskset.o CC util-linux/uevent.o CC util-linux/umount.o CC util-linux/unshare.o CC util-linux/wall.o AR util-linux/lib.a LD util-linux/volume_id/built-in.o CC util-linux/volume_id/bcache.o CC util-linux/volume_id/btrfs.o /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/util-linux/volume_id/btrfs.c: In function ‘volume_id_probe_btrfs’: /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/util-linux/volume_id/btrfs.c:110:34: warning: ‘sb’ may be used uninitialized [-Wmaybe-uninitialized] 110 | volume_id_set_uuid(id, sb->fsid, UUID_DCE); | ~~^~~~~~ /home/build/oil/_build/deps-source/busybox/busybox-1.35.0/util-linux/volume_id/btrfs.c:93:35: note: ‘sb’ was declared here 93 | struct btrfs_super_block *sb; | ^~ CC util-linux/volume_id/cramfs.o CC util-linux/volume_id/erofs.o CC util-linux/volume_id/exfat.o CC util-linux/volume_id/ext.o CC util-linux/volume_id/f2fs.o CC util-linux/volume_id/fat.o CC util-linux/volume_id/get_devname.o CC util-linux/volume_id/hfs.o CC util-linux/volume_id/iso9660.o CC util-linux/volume_id/jfs.o CC util-linux/volume_id/lfs.o CC util-linux/volume_id/linux_raid.o CC util-linux/volume_id/linux_swap.o CC util-linux/volume_id/luks.o CC util-linux/volume_id/minix.o CC util-linux/volume_id/nilfs.o CC util-linux/volume_id/ntfs.o CC util-linux/volume_id/ocfs2.o CC util-linux/volume_id/reiserfs.o CC util-linux/volume_id/romfs.o CC util-linux/volume_id/squashfs.o CC util-linux/volume_id/sysv.o CC util-linux/volume_id/ubifs.o CC util-linux/volume_id/udf.o CC util-linux/volume_id/util.o CC util-linux/volume_id/volume_id.o CC util-linux/volume_id/xfs.o AR util-linux/volume_id/lib.a LINK busybox_unstripped Trying libraries: crypt m resolv rt Library crypt is not needed, excluding it Library m is needed, can't exclude it (yet) Library resolv is needed, can't exclude it (yet) Library rt is not needed, excluding it Library m is needed, can't exclude it (yet) Library resolv is needed, can't exclude it (yet) Final link with: m resolv DOC busybox.pod DOC BusyBox.txt DOC busybox.1 DOC BusyBox.html real 0m41.496s user 0m35.028s sys 0m6.171s ~/oil Loading _build/deps-source/busybox/ OK name: busybox -- single version: 1.35.0 wedge-make () { local src_dir=$1; local build_dir=$2; local install_dir=$3; make KBUILD_SRC=$src_dir -f $src_dir/Makefile defconfig; time make } OK wedge-make wedge-install () { local build_dir=$1; local install_dir=$2; cp -v $build_dir/busybox $install_dir; ln -s -f -v busybox $install_dir/ash } OK wedge-install OK wedge-smoke-test Loaded _build/deps-source/busybox/ '/home/build/oil/_build/wedge/tmp/busybox-1.35.0/busybox' -> '/home/build/wedge/oils-for-unix.org/pkg/busybox/1.35.0/busybox' '/home/build/wedge/oils-for-unix.org/pkg/busybox/1.35.0/ash' -> 'busybox' Loading _build/deps-source/busybox/ OK name: busybox -- single version: 1.35.0 wedge-make () { local src_dir=$1; local build_dir=$2; local install_dir=$3; make KBUILD_SRC=$src_dir -f $src_dir/Makefile defconfig; time make } OK wedge-make wedge-install () { local build_dir=$1; local install_dir=$2; cp -v $build_dir/busybox $install_dir; ln -s -f -v busybox $install_dir/ash } OK wedge-install OK wedge-smoke-test Loaded _build/deps-source/busybox/ SMOKE TEST ~/oil/_build/wedge/smoke-test/busybox-1.35.0 ~/oil + wedge-smoke-test /home/build/wedge/oils-for-unix.org/pkg/busybox/1.35.0 /home/build/oil/_build/deps-source/busybox/ + local install_dir=/home/build/wedge/oils-for-unix.org/pkg/busybox/1.35.0 + /home/build/wedge/oils-for-unix.org/pkg/busybox/1.35.0/ash -c 'echo "hi from busybox ash"' hi from busybox ash + set +x ~/oil OK